[OZAPRS] How do I configure HF to VHF Gateway
Larry
larrykin at internode.on.net
Wed Jun 15 06:55:49 EST 2011
Hi David
Yes that is correct AGWPE (pro or standard do not do X-port digiing -
AGWUIdigi does.) In my configuration I only use AGWPE to interface to the
radios and to feed data to other client software (ui-view, AGW Tracker,
Xastir). I use Digi_ned to do all the heavy lifting - it is very
configurable and multi platform. I suggest you have a look at it and if you
wish to go down the path of establishing a full blown igate then I can help
with configs etc.
At the moment my setup is a real hybrid:
Radios: HF 2 x Codan 8528 (30m & 40m)
VHF Motorola GM300
Interfaces: VHF HF MFJ 1270B TNC (AGWPE)
30m HF SCS Tracker/DSP TNC (AGWPE)
40m HF Griffen Imic to PC soundcard (AGWPE)
Client software: Digi_Ned (main HF/VHF gateway)
: Ui-view (APRS server interface, home network
processing)
: AGWTracker (home network processing)
All software is loaded on a dedicated 12V PC ( Windows XP ) which runs 24/7.
I have the intention of porting the whole shebang to Linux but that is in
the future perhaps. The whole shack is run on a rather large battery bank
which can provide about 7 days power without recharging.
I have no doubt that there are much more sophisticated and cleaner/tidier
ways of setting up an Igate but it works for me!
Cheers
Larry vk5ly
----- Original Message -----
From: "Olsen's Tours and Training" <davejust at bigpond.net.au>
To: "Australian APRS Users" <ozaprs at aprs.net.au>
Sent: Tuesday, June 14, 2011 7:50 PM
Subject: Re: [OZAPRS] How do I configure HF to VHF Gateway
> Been searching on the net and it seems AGWTracker does not act as igate or
> cross port digi, so I need to download AGWUIdigi as well.
>
> On 14/06/2011, at 7:54 PM, Olsen's Tours and Training wrote:
>
>> I would like to port HF signals received to VHF.
>>
>> Presently I am running
>>
>> AGWtracker and Packet Engine Pro.
>>
>> My setup is
>>
>>
>> HF Radio using SignaLinkUSB to PEPro to AGWTracker
>>
>> VHF Radio using TinyTrack4 running as TNC Clone to PEPro to AGWtracker
>>
>> How can I configure what I have to port HF signals to VHF?
>>
>> David
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1382 / Virus Database: 1513/3702 - Release Date: 06/13/11
>
More information about the OZAPRS
mailing list