[OZAPRS] Testing a HF APRS transmitter

[Robert Thirkettle]

Hi All after sending out my results I must confess I have not checked my TS-2000 for receiver for absolute accuracy as my GPS 10MHz reference has a fault in the power supply and with out it you struggle to get the frequency correct to better than 10 Hz as even my HP signal generator is not correct with out the 10MHz reference signal connected.

Regards Rob ZL3RX

-----Original Message-----
From: ozaprs-bounces at aprs.net.au on behalf of Phillip
Sent: Sat 7/2/2011 3:45 PM
To: Australian APRS Users
Subject: [OZAPRS] Testing a HF APRS transmitter
 

 
And if everyone that uses an I gate pays something towards it we would all
have SCS DSP TNCs .. 
 
You are so right you get what you pay for !! 

My service is free !!!
 
73 Phillip 
ZL2TZE 
 
-------Original Message------- 
 
From: Jack Chomley 
Date: 2/07/2011 14:55:27 
To: vk2io at amsat.org; Australian APRS Users 
Subject: Re: [OZAPRS] Testing a HF APRS transmitter 
 
You sure get what you pay for :-) ALL IGATES should use SCS DSP Tracker TNCs
 it would be a bonus, if mobiles did too......;-) 
 
73, Jack VK4JRC 
 
 
_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs


This email may be confidential and subject to legal privilege, it may
not reflect the views of the University of Canterbury, and it is not
guaranteed to be virus free. If you are not an intended recipient,
please notify the sender immediately and erase all copies of the message
and any attachments.

Please refer to http://www.canterbury.ac.nz/emaildisclaimer for more
information.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 3279 bytes
Desc: not available
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20110702/dc38efa7/attachment.bin>