[OZAPRS] ISS Digi

[Andrew Rich]

Geoff,

I meant going the other way

How can I make the ISS beacon "go further" without asking nasa to make it 
"SGATE,WIDE2-1" ??


----- Original Message ----- 
From: "Geoff Gatward" <geoff-lists at gatwards.org>
To: "Andrew Rich" <vk4tec at tech-software.net>; "Australian APRS Users" 
<ozaprs at aprs.net.au>
Sent: Saturday, January 22, 2011 9:59 AM
Subject: Re: [OZAPRS] ISS Digi


> SGATE should be treated as a digipeater alias, not an endpoint.
>
> i.e   APRS via ARISS,SGATE,WIDE2-1
>
> Your GW should ideally have a rule like 'anything containing SGATE as
> the next digi in the path gets digipeated on 145.175 via WIDE2-1'
>
> When the digi'd packet hits you it should have had ARISS replaced by the
> ISS alias - i.e.  APRS via RS0ISS-4*,SGATE,WIDE2-1
>
> Problem is a lot of stations don't include the WIDE2-1 suffix, so you
> may need to 'pre-empt' this into the path...
>
>
> What software are you using as the gateway ??
>
> Geoff VK8GG
>
>
> On Fri, 2011-01-21 at 21:52 +1000, Andrew Rich wrote:
>> Anyone in Brisbane interested in running a DIGI for the international
>> space station ?
>>
>> 145.825 - Alias = "SGATE"
>>
>> Or another way to do it would be split freq ?
>>
>> RX on 145.825 MHz and TX on 145.175 MHz
>>
>> But I am unsure how to "make" the ISS packet "go" any further given it
>> only "goes" to SGATE ?
>>
>> - Andrew VK4TEC -
>>
>>
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs