[OZAPRS] Reverse Gate HF ( Was Help with port 14580 )
Ian Bennett
ibennett at tpg.com.au
Sun Jan 16 08:25:22 EST 2011
David,
I guess you turned on your HF not long ago as it shows you back home.
Until recently (3 mins ago) , your HF icon showed you out around Isa way
and your VHF showed you at home (242 days, 11 hours).
This is why I do what I do; one vehicle, one icon, one callsign, one
location, no confusion.
Ian
On Sat, Jan 15th, 2011 at 1:37 PM, Andrew Rich <vk4tec at tech-software.net> wrote:
> Are you bogged ?
>
> You HF shows you outside ISA since sep 2010
>
>
> ----- Original Message -----
> From: "Olsen's Tours and Training" <davejust at bigpond.net.au>
> To: "Australian APRS Users" <ozaprs at aprs.net.au>
> Sent: Saturday, January 15, 2011 12:34 PM
> Subject: Re: [OZAPRS] Reverse Gate HF ( Was Help with port 14580 )
>
>
> >I have both VHF and UHF in my 4WD and run remote area tours.
> > I send a link to the people who wish to follow me, one is configured to
>
> > show aprs.fi with filter -15 the other with -9.
> > I tell them one is for remote and one for not remote
> > At home I have an icon for each on the desktop do the wife can click on
>
> > them at her leisure
> >
> > David
> >
> > VK4MDX
> >
> > On 15/01/2011, at 12:08 PM, VK4UN wrote:
> >
> >> ?Understand Ian, All makes sense now
> >>
> >>
> >> ----- Original Message ----- From: "Ian Bennett" <ibennett at tpg.com.au>
> >> To: "Australian APRS Users" <ozaprs at aprs.net.au>
> >> Sent: Saturday, January 15, 2011 11:00 AM
> >> Subject: Re: [OZAPRS] Reverse Gate HF ( Was Help with port 14580 )
> >>
> >>
> >>> David,
> >>> I go 4Wding a bit and I have a number of non-amateur friends and
> >>> relatives
> >>> who track our progress.
> >>> If I went by the recommendations, they would have to track two SSID's
> as
> >>> the
> >>> -9 would "stop" when I ran out of VHF range. A similar thing could
> occur
> >>> if
> >>> they were watching -15.
> >>> There would be two icons reporting different positions for the same
> >>> vehicle/unit; very bad.
> >>> Being ex-Army, "track correlation" means everything to me. It is for
>
> >>> this
> >>> reason I have both TTs configured with -9. This means only one SSID to
>
> >>> track
> >>> and my current position is displayed; irregardless of how that posit
> >>> made it
> >>> into the system.
> >>> For those few who are interested in knowing how a posit got into the
> >>> system, they will know to look at the path.
> >>> So why do I run HF and VHF?? HF is the only option when I'm away.
> When
> >>> I'm
> >>> within VHF coverage, I use that because there is more capacity and it
>
> >>> leaves
> >>> the limited HF resources for those that need it.
> >>> I use the same callsign for voice regardless on what band I'm
> operating
> >>> on
> >>> so why should APRS be any different??
> >>>
> >>> Ian
> >>> VK1IAN-9
> >>>
> >>> On Sat, Jan 15th, 2011 at 10:34 AM, VK4UN <vk4un at bigpond.com> wrote:
> >>>
> >>>> ?Hi Ian, I am running both VHF and HF in the one Vehicle at the same
>
> >>>> time,
> >>>>
> >>>> VHF with a 710 Kenwood and a IC706 with a Tiny Track on HF and works
>
> >>>> fine
> >>>>
> >>>> Don't understand why you would be seen in 2 different locations if
> you
> >>>> use
> >>>>
> >>>> the same GPS??
> >>>>
> >>>> 73's
> >>>> David VK4UN
> >>>> ----- Original Message ----- From: "Ian Bennett"
> <ibennett at tpg.com.au>
> >>>> To: "Australian APRS Users" <ozaprs at aprs.net.au>
> >>>> Sent: Saturday, January 15, 2011 9:07 AM
> >>>> Subject: Re: [OZAPRS] Reverse Gate HF ( Was Help with port 14580 )
> >>>>
> >>>>
> >>>> > That would be me. I run VHF and HF in the same vehicle. Which one
> is
> >>>> > on
> >>>> is
> >>>> > determined by my location; I sometimes have both going when in the
> >>>> fringe
> >>>> > of
> >>>> > VHF coverage.
> >>>> > If I ran two SSIDs, there would be two icons for the same vehicle
> in
> >>>> > different locations.
> >>>> >
> >>>> > Ian
> >>>> > VK1IAN
> >>>> >
> >>>> >
> >>>> > On Sat, Jan 15th, 2011 at 9:58 AM, Ray Wells
> <vk2tv at exemail.com.au>
> >>>> wrote:
> >>>> >
> >>>> >> To complicate matters further, not all travellers use -15 on HF.
> >>>> >>
> >>>> >> Ray vk2tv
> >>>> >>
> >>>> >> On 15/01/11 09:44, Phillip wrote:
> >>>> >> > Hi Gordo,
> >>>> >> > The ( * ) will only function with VK*
> or
> >>>> ZL*
> >>>> >> and
> >>>> >> > there is no SSID filter ( -15 ) but in saying this if you want
> to
> >>>> pass
> >>>> >> the
> >>>> >> > -15
> >>>> >> > HF mobiles then it may be time to educate these mobile stations
> to
> >>>> use
> >>>> >> the
> >>>> >> > correct symbol as there is a symbol filter.
> >>>> >> >
> >>>> >> > s/-> This will pass all House and Car
> >>>> >> > symbols
> >>>> >> > (primary
> table)
> >>>> >> >
> >>>> >> > Do you only have HF or is this a mixed Igate ?
> >>>> >> >
> >>>> >> > Below is the URL for the filter commands
> >>>> >> >
> >>>> >> > http://www.aprs2.net/wiki/pmwiki.php/Main/FilterGuide
> >>>> >> >
> >>>> >> > It maybe time to ask Roger for a SSID Filter
> >>>> >> >
> >>>> >> > 73 Phillip
> >>>> >> > ZL2TZE
> >>>> >> >
> >>>> >> >
> >>>> >> >
> >>>> >> > From: Gordon Taylor
> >>>> >> > To: 'Australian APRS Users'
> >>>> >> >
> >>>> >> > Sent: Thursday, January 13, 2011 8:22 PM
> >>>> >> >
> >>>> >> > Subject: Re: [OZAPRS] Was Help with port 14580 - now another
> quiz
> >>>> >> >
> >>>> >> > Next question.
> >>>> >> >
> >>>> >> > If I want to reverse gate HF travellers out to VHF I.e VK*-15
> how
> >>>> >> > >> > can
> >>>> I
> >>>> >> do
> >>>> >> > this with UI-View.
> >>>> >> >
> >>>> >> > I can't set the Igate.ini to reverse gate VK*-15 (just doesn't
> >>>> >> > work)
> >>>>
> >>>> >> > and
> >>>> >> you
> >>>> >> > can't use a * as the first character I.e *-15 so that is out.
> >>>> >> >
> >>>> >> > I don't think there is a filter command to use with port 14580
> >>>> >> > that
> >>>> >> will
> >>>> >> > just bring in the VK*-15 traffic enabling me to reverse gate
> VK*
> >>>> which
> >>>> >> would
> >>>> >> > only be the VK*-15 traffic.
> >>>> >> >
> >>>> >> > Any ideas learned ones?
> >>>> >> >
> >>>> >> > Regards,
> >>>> >> > Gordo VK4VP
> >>>> >> > _______________________________________________
> >>>> >> > OZAPRS mailing list
> >>>> >> > OZAPRS at aprs.net.au
> >>>> >> > http://lists.aprs.net.au/mailman/listinfo/ozaprs
> >>>> >> >
> >>>> >>
> >>>> >> _______________________________________________
> >>>> >> OZAPRS mailing list
> >>>> >> OZAPRS at aprs.net.au
> >>>> >> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> >>>> >>
> >>>> >>
> >>>> >>
> >>>> >
> >>>> >
> >>>> >
> >>>> > _______________________________________________
> >>>> > OZAPRS mailing list
> >>>> > OZAPRS at aprs.net.au
> >>>> > http://lists.aprs.net.au/mailman/listinfo/ozaprs
> >>>> >
> >>>> >
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> OZAPRS mailing list
> >>>> OZAPRS at aprs.net.au
> >>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> OZAPRS mailing list
> >>> OZAPRS at aprs.net.au
> >>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> >>
> >>
> >> _______________________________________________
> >> OZAPRS mailing list
> >> OZAPRS at aprs.net.au
> >> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> >
> > _______________________________________________
> > OZAPRS mailing list
> > OZAPRS at aprs.net.au
> > http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
>
>
More information about the OZAPRS
mailing list