[OZAPRS] Reverse Gate HF ( Was Help with port 14580 )

[Ray Wells]

To complicate matters further, not all travellers use -15 on HF.

Ray vk2tv

On 15/01/11 09:44, Phillip wrote:
> Hi Gordo,
>                        The (  *  ) will only function with VK*  or ZL* and
> there is no SSID filter  ( -15 ) but in saying this if you want to pass the
> -15
> HF mobiles then it may be time to educate these mobile stations to use the
> correct symbol as there is a symbol filter.
>
>                s/->        This will pass all House and Car symbols
>                                                  (primary table)
>
> Do you only have HF or is this a mixed Igate  ?
>
> Below is the URL for the filter commands
>
> http://www.aprs2.net/wiki/pmwiki.php/Main/FilterGuide
>
> It maybe time to ask Roger for a SSID Filter
>
> 73 Phillip
> ZL2TZE
>
>
>
> From: Gordon Taylor
> To: 'Australian APRS Users'
>
> Sent: Thursday, January 13, 2011 8:22 PM
>
> Subject: Re: [OZAPRS] Was Help with port 14580 - now another quiz
>
> Next question.
>
> If I want to reverse gate HF travellers out to VHF I.e VK*-15 how can I do
> this with UI-View.
>
> I can’t set the Igate.ini to reverse gate VK*-15 (just doesn’t work) and you
> can’t use a * as the first character I.e *-15 so that is out.
>
> I don’t think there is a filter command to use with port 14580 that will
> just bring in the VK*-15 traffic enabling me to reverse gate VK* which would
> only be the VK*-15 traffic.
>
> Any ideas learned ones?
>
> Regards,
> Gordo VK4VP
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>