[OZAPRS] 2.45 GHz Interference

Andrew Rich vk4tec at tech-software.net
Mon Jan 10 22:35:12 EST 2011


Its Darryl's sub atomic partical accelerator in his fire place

Light slows down at his joint 
  ----- Original Message ----- 
  From: Damien Gardner Jnr 
  To: Australian APRS Users 
  Sent: Monday, January 10, 2011 9:28 PM
  Subject: Re: [OZAPRS] 2.45 GHz Interference


  I thought (apart from the speed) that the whole point of N was that it was on 5 Ghz, so you didn't have interference from 2.4ghz gear?  My dualband AP here runs A/N on 5, and B/G on 2.4.. ?


  --DG


  On 10/01/2011, at 10:12 PM, Darryl Smith wrote:


    People

    Slightly off topic, but anyway. Wifi in my house has been really bad for ages. It just does not work. I thought it was interference from servers, but I replaced them, and things are still really bad. Well, today I needed to get some Perspex, and there was a cheap PC place a few doors down, so I picked up an 802.11n router for $55, that was supposed to have 5 times the range of 802.11g products.

    After setting the device up, I tried to use my laptop in the Garage. No Wifi. Back to the office, and I found that it worked not too bad next to the access point, but it was marginal about 1.5m away.

    I realized at this point that I probably had an interference issue. After all, what else could it be. Then I thought that it might be a faulty PIR on my alarm, since they are dual PIR/Microwave. Turning the alarm off resulted in fantastic Wifi performance. Turning it back on stopped the Wifi.

    Then I went and found the manual for the PIR. Turns out that the units I purchased were not 10 GHz but 2.45 GHz.

    Just something for people to watch out for. The units I have are from Crow Electronics

    Darryl


    ---------
    Darryl Smith, VK2TDS POBox 169 Ingleburn NSW 2565 Australia
    Mobile Number 0412 929 634 [+61 4 12 929 634 Int] - 02 9618 6459
    www.radio-active.net.au/blog/ - www.radio-active.net.au/

    _______________________________________________
    OZAPRS mailing list
    OZAPRS at aprs.net.au
    http://lists.aprs.net.au/mailman/listinfo/ozaprs





------------------------------------------------------------------------------


  _______________________________________________
  OZAPRS mailing list
  OZAPRS at aprs.net.au
  http://lists.aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20110110/81f63273/attachment-0001.htm>


More information about the OZAPRS mailing list