[OZAPRS] Portable APRS Digi Using Argent OT2?

[Dave Ingram]

I have my T2 set up as a -1 fillin digi with the following settings:
Alias: WIDE-1
Hops: 1
Preempt: Off
ID: On
Enabled: On
Dupe Check: 60
Digipeat on my call: On

It seems to work quite well.


David.

On 25/02/2011 08:58, Jack Chomley wrote:
> I am looking to configure a portable OT2 digi, any suggestions for what should be in the ALIAS and HOP settings. Currently the default is RELAY WIDE & TEMP, I have set WIDE & TEMP to 2 hops, with ID on, with the config software. 
> The digi seems to work, however it does not show up on aprs.fi in the path when I use it to get to an IGATE. The digi has a totally different callsign to my own.
>
> 73,  Jack. VK4JRC
>
> Sent from my iPad

-- 
David Ingram (VK4TDI)
Brisbane, Queensland, Australia
To avoid spam trap, send email to dave at ingramtech dot com

GPG: B0731AED
W: http://ingramtech.com/
MH: QG62lm