[OZAPRS] TT3plus / TT4 HF set up help needed.

[Gordon Taylor]

Stuart,

                That is working fine.  The vagaries of HF mean that gating
can be all over the place depending on propagation.  Look at the posits of
VK4UN-15 or VK4KEL -15 as they have both been/are travelling around oz.
There are some big patches of no beacons and the only explanation is
propagation.

 

Regards,
Gordo VK4VP

 

From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of scameron
Sent: Wednesday, 29 September 2010 20:06
To: Australian APRS Users
Subject: Re: [OZAPRS] TT3plus / TT4 HF set up help needed.

 

Hi Gordon, thanks for your quick response i have been able to monitor via
AGW tracker HF live and on APRS.fi and it appears ok, i have not set up up
an Igate and don't wish to at this stage, i did a small, trip this afternoon
but was not convinced the signal was getting into the Igates ok, have lookat
Vk5ade-14, i had to change the ssid so i could differ between the 2
trackers, i have been running VHF ok for some time now with no problems.

Kind regards,

Stuart Vk5ade

----- Original Message ----- 

From: Gordon Taylor <mailto:gordon.t at internode.on.net>  

To: 'Australian APRS <mailto:ozaprs at aprs.net.au>  Users' 

Sent: Wednesday, September 29, 2010 7:29 PM

Subject: Re: [OZAPRS] TT3plus / TT4 HF set up help needed.

 

Stuart,

                Have you listened to the TX audio on another radio.  A bit
of distortion etc can cause it not to be gated.

 

How do you mean it works on the bench?

 

Have you set up your own HF IGate and it works?

 

Regards,
Gordo VK4VP

 

From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of scameron
Sent: Wednesday, 29 September 2010 19:53
To: Australian APRS Users
Subject: [OZAPRS] TT3plus / TT4 HF set up help needed.

 

Hi group, i am still having issues setting up either TT3plus or TT4 on HF
mobile Icom 706 Mk2g, i have checked my settings against our local APRS VK
settings and can not see why it should not work, they both work here on the
bench OK. Is it possible for somebody to email the settings either one would
do.

Regards,

Stuart Vk5ade

 

 

  _____  

_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.aprs.net.au/pipermail/ozaprs/attachments/20100929/db886213/attachment-0001.htm