[OZAPRS] Signallink Issues continue

[David and Justine Olsen]

Update-  that time I had to both delete the USB device and delete the  
radio port to make it work.


On 28/05/2010, at 7:44 AM, David and Justine Olsen wrote:

> I thought I'd located the cause of the problem many times, but it
> appears to be an PC issue that I can't get to the bottom of
> I'd appreciate any suggestions to get the current setup working-
>
> The Setup
>
> PC running PEPro and UIview32
> SignallinkUSB
> Icom703 and Amp
>
>
>
> The problem-
>
> After TXing successfully a few times, the Signalink fails to Tx.
> Deleting the radioport in PEPro and reconfiguring does nothing
> Deleting the USB Card from System Devices fixes the problem for  a few
> successful Tx's then the problem manifests itself again.
>
> David
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs