[OZAPRS] TT4 switching between primary and secondary settings

[David and Justine Olsen]

Thanks Steve

I'll look into that. I want to put an external switch on it so I can  
switch from VHF config to HF config

David

On 16/05/2010, at 9:09 AM, Steven Heimann wrote:

> I haven't tried the new alpha software yet but if you are running the
> old Tracker v4.06 software you select the secondary configuration by
> shorting JP1.
>
> Look at "Primary and Secondary Configuration" in "TT4 Tracker  
> v4.06.pdf"
> which is in "Tracker_v4.06.zip" under the "Older legacy files" section
> on the TT4 page of the Byonics web site.
>
> Regards
> Steven VK2BOS
>
> On Sun, 2010-05-16 at 08:18 +1000, David and Justine Olsen wrote:
>> On my TT3 I connected a switch to the PCB to allow switching between
>> primary and secondary configs. I know I've read the same can be done
>> with the TT4 but I cannot find the instructions in the documentation.
>>
>> Can anyone lead me to the appropriate document?
>>
>> David
>> VK4MDX
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs