No subject
Sat Mar 20 08:49:14 EST 2010
It can be set via the serial port, or when connected to the Digi and logged
in as SYSOP the time can be set.
73
Warren.
-----Original Message-----
Hi there all I have a question regarding a digi that is going to be setup
very shortly in the VK5 area to fill in a black spot.
Using the config for the unit, I have maybe one concern.
The clock, if using a TT4 the time stamp is taken from the gps, now with a
TNC2 MFJ 1270b how do you 'set' the clock, I know there is a clock command
Ie clock 12 40 00 would set it.
Can you program the time via locally? Or is it a remote over there air
command only?
I need to know this as the person that is going to be setting it up will
need the info.
Cheers
Paul
_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs
More information about the OZAPRS
mailing list