[OZAPRS] smart meters ?

Sat Dec 11 08:56:05 EST 2010

Hi Darryl

Just a bit of simple maths seems to indicate that smart meters are not 
"green", i.e. energy efficient.

The meters use 2 watts continuously, even under no load conditions. 
According to the power company blurb there will be around 7.2 million of 
them fitted which equates to a _*continuous*_ power grid load of 14.4 
megawatts.  The old meter consumed less than a watt and then only whilst 
actually metering.   When there was no load there was no power being 
consumed. Total grid load, less than half the new meters and probably 
nearer one quarter than one half.  As well, the old meters did not 
generate more RFI and need unsightly towers all over the place.

I don't think that the meters can be justified for "green" reasons.  In 
fact as a retired self funded pensioner, who goes to bed at night and  
therefore has almost zero off peak electricity use, the change means 
that I will probably no longer be able to afford to run air conditioning 
on a peak period hot day and so will be just another statistic in the 
"heat related" causes of death.  Not only that but salt is being rubbed 
into the wound by making me pay for the dammed thing.

The meters are not only not green, they are just an  attack on the most 
vulnerable section of the public by vested interests  misusing the green 
banner.   I suspect that the power company's profit margin is the 
greater driving force.

I run a few computers here, most resurrected from garage sales and other 
peoples cast offs. Most seem to have  a 300 to 400 watt power 
consumption not counting the monitors. I would suspect however that this 
saves more global energy by recycling than being able to buy lots of new 
low power systems, not to say I wouldn't buy them if I could afford it . 
Better if the energy was saved at my end but you have to be realistic 
about energy consumption globally.

Sorry for the rant,  just don't get me started on the "savings" we all 
get from installing compact flouro lamps ........ Sigh..........
                                                                                                                                       Regards from grumpy old man
                                                                                                                                        Tony VK3API

On 11/12/2010 7:19 AM, Darryl Smith wrote:
> Hi Guys...
>
> I will not make too many comments on the matter as I am now the chief engineer at www.Greenbox-group.com, and if you check out the URL you might find some interesting information. The following comments are personal comments, not related to anything...
>
> Smart Meters have an accuracy of commonly 0.5% or 1%. From what I can see, most of the monitoring devices on the market have sensors that are no better than 2% accurate, with electronics that make things even worse. My guess is that given the AEMO rules for Meters in general, the two will *NOT* line up. And it will be the Smart Meter that is correct. There are very specific rules how to totalize electricity usage, and these do not tend to be followed by the after market units. I suspect that the error is much worse at the bottom end of the scale of consumption.
>
> In order to reduce my energy consumption at home, I have done a few things... Firstly I replaced all my servers with a low end new dual core hyperthreaded machine running 4 GBytes of RAM and VMWare. On this I have installed about five different virtual machines. The software for this is free. I have also outsourced my email to sherweb so that I don't need to have redundant machines for email. I also have a few PC's that use about 5W each, and run them on USB thumb drives.
>
> Anyone wanting more details can contact me directly. And, yes, I still work from home, but the business is just operating the background at the moment.
>
> Darryl
>
> ---------
> Darryl Smith, VK2TDS POBox 169 Ingleburn NSW 2565 Australia
> Mobile Number 0412 929 634 [+61 4 12 929 634 Int] - 02 9618 6459
> www.radio-active.net.au/blog/ - www.radio-active.net.au/
>
>
> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On Behalf Of Gary Stern
> Sent: Saturday, 11 December 2010 12:14 AM
> To: Australian APRS Users
> Subject: [OZAPRS] smart meters ?
>
> Thinking about, it should really be too hard to self monitor power consumption, total, circuit by circuit etc.... and even possibly work out power factors, I wouldn't doubt there is a setup somewhere on the market, usb to a computer and store everything, do your own calculations and then you could check these smart meters...
>
> Any bets on their accuracy :-)
>
> On 10/12/2010 11:53 AM, Tony King wrote:
>> By the way has anybody been fitted with a smart meter yet. I notice
>> that they use 2 watts of power continuously from the consumer side of the meter.
>> The man turned up here to fit one yesterday but went away without
>> installing it when I asked to see the certificate of compliance (or
>> it's
>> number) for
>> electromagnetic compatibility. They work on 2.3 GHz as far as I can
>> find out but I would be interested in any details ......
>>
>>
>> With heaps of RF originating here I can imagine swamping the things
>> receiver and leaving myself on permanent maximum rate charge or
>> conversely the thing jamming alll my receivers as in the reports on
>> the highly technical and reliable talk back radio shows of broadcast
>> interference......
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20101211/55df1758/attachment-0001.htm>