[OZAPRS] Nubie

[larry]

A sensible and helpful reply would be to refer Chris to the official APRS in 
Australia site either:

http://www.aprs.net.au/vhfaprs.php for VHF applications or

http://www.aprs.net.au/hf_overview.php for HF applications

 rather than the  nonsensical and presumably "tongue-in-cheek" (?) cr*p 
suggested below.



----- Original Message ----- 
From: "Andrew Rich" <vk4tec at tech-software.net>
To: "Andrew Rich" <vk4tec at tech-software.net>; "Australian APRS Users" 
<ozaprs at aprs.net.au>
Sent: Sunday, September 20, 2009 9:59 AM
Subject: Re: [OZAPRS] Nubie


> Please set your path to
>
> VIA
> WIDE1-1,WIDE2-3,ISS,VK4RBR-3.RELAY,WIDE,MOBILE,CQ,HFGATE,IGATE,WIDE3-4,RELAY
>
>
> ----------------------------------------------------------
> Andrew Rich
> Airways Technical Officer Grade 4
> Surveillance - RADAR ADS-B
> Amateur Radio Callsign VK4TEC
> email: vk4tec at tech-software.net
> web: www.tech-software.net
> ----- Original Message ----- 
> From: "Andrew Rich" <vk4tec at tech-software.net>
> To: "Australian APRS Users" <ozaprs at aprs.net.au>
> Sent: Sunday, September 20, 2009 10:25 AM
> Subject: Re: [OZAPRS] Nubie
>
>
>> Chris,
>>
>> + What freq ? HF or VHF or UHF
>> + Home = 60 mins would be good for VHF
>> + GPS60 should put out NMEA I am assuming
>> + Any reason you chose SSID -5 ?
>>
>>
>>
>>
>> ----------------------------------------------------------
>> Andrew Rich
>> Airways Technical Officer Grade 4
>> Surveillance - RADAR ADS-B
>> Amateur Radio Callsign VK4TEC
>> email: vk4tec at tech-software.net
>> web: www.tech-software.net
>> ----- Original Message ----- 
>> From: "Chris Herd" <zl2tch at gmail.com>
>> To: "Australian APRS Users" <ozaprs at aprs.net.au>
>> Sent: Sunday, September 20, 2009 10:20 AM
>> Subject: [OZAPRS] Nubie
>>
>>
>>> Hi Guys
>>>
>>> I have a fixed APRS station and have loaded in a fixed position into the
>>> system.
>>>
>>> I have just connected a GPS to the system and want to know a few things
>>> before I allow this system to beacon.
>>>
>>> The system is Garmin GPS 60
>>> TNC is a Kenwood RC-710.
>>> RF is IC706.
>>>
>>> Call sign is VK3TCH-5
>>>
>>> So I want to know what settings to load into the kenwood to avoid over
>>> beaconing my position and thus earning the wrath of the learned
>>> gentlemen that keep the system working.
>>>
>>> Any guidance gratefully recieved.
>>>
>>> 73
>>>
>>> Chris Herd
>>> VK3TCH/ZL2TCH
>>> _______________________________________________
>>> OZAPRS mailing list
>>> OZAPRS at aprs.net.au
>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.409 / Virus Database: 270.13.108/2383 - Release Date:
>> 09/19/09
>> 17:50:00
>>
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.409 / Virus Database: 270.13.108/2383 - Release Date: 
> 09/19/09
> 17:50:00
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.108/2383 - Release Date: 09/19/09 
17:50:00