[OZAPRS] WX Station Help

[Andrew Rich]

Ok, so what is the difference in the two you are seeing

You have described the symptoms

1. Check the APRS spec
2. Capture some packets
3. Interpret the break down


----- Original Message ----- 
From: "Peter Bye" <vk2mpj at internode.on.net>
To: "Australian APRS Users" <ozaprs at aprs.net.au>
Sent: Saturday, November 28, 2009 9:31 AM
Subject: [OZAPRS] WX Station Help


> Hi all,
>
> I have an APRS weather station set up using a Fine Offset WS-1081, which
> interfaces with Cumulus v1.8.7.  I have Cumulus connecting to
> rotate.aprs.net.au:14579 to upload current weather.
> However I have just noticed that my barometric pressure is not being
> reported correctly.  Culmulus and my wx station concurr with each other
> and the wxnow file that is generated by Cumulus appears to be in order
> (Pressure at the moment is 1003hpa, wxnow file shows
> "360/002g005t091r000p...P000h46b10030".  When I look at my station on
> either aprs.fi or UI-View the pressure is out, (currenlty showing 1016.7).
>
> I cannot see where the problem is, everything seems fine right up until
> diplaying on the APRS program of choice.
>
> Can anyone help with this?
>
> Cheers
> de Pete VK2MPJ
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.426 / Virus Database: 270.14.85/2531 - Release Date: 11/27/09 
19:39:00