[OZAPRS] Problem getting Tinytrak 3 going

[Peter Bye]

With smart beaconing turned on I think you need to be moving for it to 
transmit.  If it doesn't detect any position changes then it won't transmit.
At least thats the way I think it works.. :-)

Mark Cheeseman wrote:
> Hi all,
>
> I've been playing around with a TT3, but can't get it to transmit any 
> posits. It's configured as per the instructions on 
> http://vk2.aprs.net.au/tinytrak.php, but when I plug in a GPS it 
> doesn't transmitting. The "GPS Valid" LED is on (not flashing).
>
> It transmits a couple of packets when first powered up, and then 
> nothing, unless I unplug the GPS, whereupon is transmits something (I 
> haven't had a chance to try to decode it to see what the packets are).
>
> Any ideas where I should start looking for the problem?
>
> Cheers,
> Mark VK2XGK
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
>
>


_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs