[OZAPRS] Re: Gating HF
vk5ex.andrew at gmail
vk5ex.andrew at gmail.com
Sat Apr 4 09:29:36 EST 2009
Yes that is correct.
You can also run multiple copies of UiView at the same time on the one PC as
well. This gives more X port digi options as well as further options with
regards to SSID's and symbols.
Andrew .. VK5EX
----- Original Message -----
From: "Tony Hunt" <wavetel at internode.on.net>
To: <ozaprs at aprs.net.au>
Sent: Friday, April 03, 2009 17:41
Subject: [OZAPRS] Re: Gating HF
> Andrew / Phillip ..
>
> Its all true.. I take it all back.. Your right. Within some limitations it
> works as a X port digi. These limits are probably liveable to most of us
> as
> well.. I have not done it in a long time like that I must admit but I
> still
> see the settings are there from previously in the Digi Routes if I ever
> turned it on again.
>
> Tony & Eva Hunt wavetel at internode.on.net
>
> ----- Original Message -----
>> Date: Fri, 3 Apr 2009 07:07:07 +0930
>> From: "vk5ex.andrew at gmail" <vk5ex.andrew at gmail.com>
>> Subject: Re: [OZAPRS] Re: Gating HF
>> To: "Tony Hunt" <wavetel at internode.on.net>, "Australian APRS Users"
>> <ozaprs at aprs.net.au>
>> Message-ID: <19912C3A40E64047A0327455B0BF65E4 at P4>
>> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
>> reply-type=original
>>
>> Hi Tony,
>>
>> > Uiview does not Do a cross port digipeat to VHF to get the traffic to
> the
>> > Igate locally.
>>
>> Uiview can do a cross port digipeat from HF to VHF as well as IGATE feed
>> all at the same time. Perhaps your above comments are just being specific
> to
>> your setup though ?
>>
>> I thought Id better clarify this in case people got confused :-}
>>
>>
>> Regards .. Andrew .. VK5EX
>
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
More information about the Ozaprs
mailing list