[OZAPRS] Gating HF

[David and Justine Olsen]

Philip

Once again thanks, I will set up accordingly.

David



On 2 Apr 2009, at 10:14, Phillip wrote:

> Hi David,
>                      You should be connecting to your Counrty APR- 
> IS that is
> why these are available and many spend time setting them up
> connecting outside is not wrong but discouraged that is why the  
> Tier 2 Group
> has set up servers in most countries. It also helps share the load.
>
> http://aprsnz.aprs2.net:14501/      status page    ZL2TZE Phillip
>
> http://australia.aprs2.net:14501/   status page    VK2XJG  Geoff
>
> http://newzealand.aprs2.net:14501/  status page   ZL3UDR   David
>
> 73 Phillip
> ZL2TZE
>
> -------Original Message-------
>
> From: David and Justine Olsen
> Date: 2/04/2009 12:28:36 p.m.
> To: Australian APRS Users
> Subject: Re: [OZAPRS] Gating HF
>
> Robert as you know, I am just a newbie so I won't play expert. I'll
> ust tell you what I have and why.
>
> 1 and 2. The server I connect to is aprswest.net port 10152, or
> aprsnet.au same port. Not sure if this is what I should do, just a
> list provided in UIView, so I used it.
> 3. No idea. I use MixW TNC emulation only because MixW provided me
> the option to use my CI-V interface so I did not need to build a PTT
> interface. To do this I needed to download some virtual port
> emulation software as well. All is on the MixW site. UIView then
> provides the iGate
>
> David
> VK4MDX
>
>
>
>
>
> On 2 Apr 2009, at 09:11, Robert Thirkettle wrote:
>
>> Hi All I need some guidance with sorting out my HF gateway at
>> present I
>> take HF data to VHF just using a TNC it all works but there is no
>> tractability through the system as my TNC does not insert its  
>> callsign
>> plus I am going to switch to a SCS TNC when it arrives at the end of
>> next week. This TNC is only a single port so I will need to gate in
>> software. As I now have broadband in the shack it's just as easy to
>> take
>> the HF straight to the net.
>>
>> How are the others doing their HF gating? I prefer not to reinvent  
>> the
>> wheel so some guidance would be appreciated.
>>
>> I need to know
>> 1 what server to use
>> 2 What port to connect to
>> 3 what particular program is best
>>
>> Regards Rob Thirkettle  ZL3RX
>> Dept  Physics & Astronomy
>> University of Canterbury
>> Private Bag 4800,
>> Christchurch 8020,
>> New Zealand
>> Tel: +64 3 364 2510
>> Fax: +64 3 364 2469
>> mailto:rob.thirkettle at canterbury.ac.nz
>>
>>
>> _______________________________________________
>> Ozaprs mailing list
>> Ozaprs at aprs.net.au
>> http://aprs.net.au/mailman/listinfo/ozaprs
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ 
> ozaprs<imstp_animation_butterflies_en_020908.gif>_____________________ 
> __________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs