[OZAPRS] UIDIGI and Cheap HH
WILSON Jim
Jim.WILSON at stanwell.com
Fri Mar 14 11:39:11 EST 2008
Thanks Richard
-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of Richard Hoskin
Sent: Friday, 14 March 2008 9:38 AM
To: 'Australian APRS Users'
Subject: RE: [OZAPRS] UIDIGI and Cheap HH
Jim,
Here is an example of a Fill-in Digi config for UIDIGI
Good luck,
Cheers
Richard
VK3JFK
-----------------------------------------
/*
UIDIGI Configuration source file
Version 1.9 BETA 3 20040101
Written by Marco Savegnago IW3FQG
*/
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Set the digipeater ax.25 address callsign (SSID allowed) // Up to 6
characters+SSID // Digicall [t]
DigipeaterCallsign = VK3XXX-1
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Set the digipeater address alias
// Up to 6 characters (NO SSID)
// DIGIAlias [t]
DigipeaterAlias = Locate
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Digipeater Info Text up to 80 char
// Info [t]
//
123456789012345678901234567890123456789012345678901234567890123456789012
3456
7890
InfoText = Description of Digi / contact info goes
here
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Path used when SSID routing is used (Up to 8 hops) // (Direction)
Path // xpath [path]
NorthPath =
SouthPath =
EastPath =
WestPath =
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// BudList Calls (up to 8 calls, default none) // All SSID's of base
call will be ignored // BUdlist [calls]
BudList =
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// UI Generic Calls (up to 8)
// Calls recognized by digi to repeat
// Default (RELAY, WIDE, TRACE)
// Uidigi [calls]
UIDigiCall = WIDE1-1
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// UI Flood Call (up to 6 characters)
// Default (WIDE)
// UIFlood [call]
UIFloodCall = BLANK1
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// UI Trace Call (up to 6 characters)
// Default (TRACE)
// UITrace [call]
UITraceCall = BLANK2
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Txdelay (default 30 = 300)
// range 1-255 x10ms
// TXdelay [n]
TxDelay = 35
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Fullduplex (default 0)
// Enables (1) or Disables (0)
// NO COMMAND FROM CONSOLE
FullDuplex = 0
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// PPErsistence (default 64)
// range 1-255
// Parameter fo channel access timing
// PErsistance [n]
PPersistance = 64
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Slottime (default 10)
// range 1-255 x100ms
// SLottime [n]
SlotTime = 30
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Frack (default 5)
// range 1-15
// Frack [n]
Frack = 5
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Maxframe (default 4)
// range 1-7
// MAxframe [n]
Maxframe = 4
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Retry (default 10)
// range 0-127
// RETry [n]
Retry = 10
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// RespTime 2 (default 100)
// range 0-6000 ms
// RESPtime [n]
RespTime = 100
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Link Check (default 18000)
// range 0-65535 ms
// CHeck [n]
LinkCheck = 18000
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Duplicate Packet Suppression Interval second (default 28) // range
0-180 seconds // UICheck [n]
DuplicateSuppression = 32
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Loop Packet Suppression Interval Mask (default 3) // 0x01 = Do not
repeat frame with source address equal to digipeater call or alias //
0x02 = Do not repeat frame with the digipeater call in the already
digipeated via list // range 0-3 // UILoop [n]
LoopSuppression = 3
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Treat different SSID in destination call (default 1) // Enables (1)
or Disables (0) UISSID digipeating mode // Used for SSID Directional
routing // UISsid [n]
HandleUISSID = 1
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Reply to Query (default 1)
// Enables (1) or Disables (0) ?APRS? response query // UIQuery [n]
ReplyToQuery = 1
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// UIFLOOD Algorithm flag (default 0)
// bit 0 make call substitution after the last WIDEn-n digied // bit 1
insert callsign before WIDEn-n // UIFLDfl [n]
UIFLOODOptions = 4
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// UITRACE Algorithm flag (default 0)
// bit 0 makes call substitution after the last TRACEn-n digied // bit
1 Disables // UITRFl [n]
UITRACEOptions = 2
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Make call substitution when repeat frames addressed to UIDIGI
Callsign // default (1) // Enables (1) or Disables (0) UIDIGI callsign
substituion for UIDIGI calls // UIDCsb [n]
UIDIGICallSubstitution = 1
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Preempt calls (default none)
// see docs
PreemptCalls =
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Preempt add (default none)
// see docs
PreemptAdd =
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Preempte Digipeater (default 0)
// see docs
PreeemptedDigipeat = 0
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Don't change SSID (decrement) to UI Message (frame with info that
start // with char '~' default (1) // 0 disables // range 0-1 //
UIMessage [n]
UIMessage = 1
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Process only UI Frame (default 1)
// Enable processing of UI frame only
// 0 disables
// range 0-1
// UIOnly [n]
UIOnly = 1
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// PID of processed frames (default 240) // Enable frame filtering
algorithm base on PID of frame // 0 disables // range 0-255 // UIPid [n]
UIPID = 240
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Sysop Password up to 80 char
// NO CONNAMD FROM LOCAL CONSOLE
//
123456789012345678901234567890123456789012345678901234567890123456789012
3456
7890
SysopPassword = Access Password
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Beacon x interval Seconds
// default 1 = 600
// default 2 = 1800
// default 3 = 3600
// range 0-65535 seconds
// BEacon [x] [n]
Beacon1Interval = 1800
Beacon2Interval = 900
Beacon3Interval = 0
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Beacon x offset (default 0)
// range 0-65535 seconds
// BEACONOffset [x] [n]
Beacon1Offset = 0
Beacon2Offset = 0
Beacon3Offset = 0
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Digipeater Beacon x Text up to 70 char // see APRS reference doc for
layout // BText [n] [t] //
1234567890123456789012345678901234567890123456789012345678901234567890
Beacon1Text = !3600.13S114400.080#PHG4130/ APRS Fill-In
Digi - (location) -
Beacon2Text =
Beacon3Text = !3627.13SX14202.08E# *- APRS Digi NOT
Currently Operational -*
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Destination ax.25 address of beacon (6 characters + SSID) // See APRS
working group documentation APNUnn // UNproto [t]
BeaconDestination = APNU19
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// AX.25 Beacon x path (up to 8 hops)
// Path that Beacon x will be sent out with // Bdl [x] [path]
Beacon1Path = WIDE2-2
Beacon2Path =
Beacon3Path = WIDE2-2
AuxPath =
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Destination ax.25 address of aux input device string // Up to 6
characters + SSID
AuxDestination = TLM
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
// Aux Beacon interval (default 0)
// Sets the interval for the beacon of aux input data // AUXRate [n]
AuxRate = 0
//----------------------------------------------------------------------
-
//----------------------------------------------------------------------
-
> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au]
> On Behalf Of WILSON Jim
> Sent: Friday, 14 March 2008 10:01 AM
> To: VK / ZL APRS Users
> Subject: [OZAPRS] UIDIGI and Cheap HH
>
> Hi All,
> Someone posted a config for UIDIGI for a fillin repeater some time
> back, Anyone still have a copy? I'm running a scout camp with four
> teams on foot which I want to track. It's a hilly area, so I want to
> put a digi on a high area of the property. I won't be using the APRS
> frequency, and I'll be receiving the info via RF at the base. (no
> gating to another repeater or the net.) What would be the correct
> UIDIGI setup for this use? I assume the trackers would only need 1-1
> configured, but as there won't be any other digis on the frequency, I
> assume I can just leave them at their current settings.
>
> Second question,
> I'm short handhelds for the event, I'd like to pick up some cheap HH.
> Are there any standouts in the Chinese offerings? Would need a
> handheld for the digi (MFJ-1270), and handhelds for trackers
> (opentrackers & some
> opentracker+).
>
> Thanks,
> Jim
> VK4HJD VK4JYM
> ______________________________________________________________________
> ____
> ______
>
> This email (including all attachments) may contain personal
> information and is intended solely for the named addressee. It is
> confidential and may be subject to legal or other professional
> privilege and any confidentiality or privilege is not waived or lost
> because this email has been sent to you by mistake. This email is
> also subject to copyright. No part of it should be reproduced,
> adapted or communicated without the written consent of the copyright
> owner. Any personal Information in this email must be handled in
> accordance with the Privacy Act 1988 (Cth). If you have received it
> in error, please let Stanwell Corporation Limited know by reply email,
delete it from your system and destroy any copies.
> Stanwell is not responsible for any changes made to a document other
> than those made by Stanwell. Stanwell accepts no liability for any
> damage caused by this email or its attachments due to viruses,
interference,
> interception, corruption or unauthorised access. If you have any
doubts
> about the authenticity of an email purportedly sent by us, please
> contact us immediately. If this is a commercial electronic message
> within the meaning of the Spam Act 2003 (Cth), you may indicate that
> you do not wish to receive any further commercial electronic messages
> from Stanwell by emailing mailto:privacy at stanwell.com.
> ______________________________________________________________________
> ____
> ______
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
More information about the Ozaprs
mailing list