[OZAPRS] Satgate settings

Andrew Rich vk4tec at people.net.au
Wed Sep 26 10:42:38 EST 2007


Mike,

What exactly is your problem ?




--------------------------------------------------------------------------
--
Andrew Rich VK4TEC
vk4tec at people.net.au <mailto:vk4tec at people.net.au>
http://www.tech-software.net




-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au]On
Behalf Of Mike Alsop
Sent: Wednesday, 26 September 2007 10:37 AM
To: VK / ZL APRS Users
Subject: [OZAPRS] Satgate settings


Hi guys

A little help needed. I have changed the setup here to make the gate in
Katherine a Satgate as I am sure it will be more useful. I am getting
good signals from ISS, but nothing is happening so I am assuming I have
something wrong in the TNC setup.

I am using and older MFJ-1270B (stock standard) and running aprsd in
Linux. I am using the following line in the INIT.TNC file:

UNPROTO APRS VIA ARISS,SGATE,WIDE2-1

I think this is where the problem maybe.

i am using port 10149 on australia2.aprs2.net

Any help appreciated.

Mike
VK8ZMA
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs

Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.5.487 / Virus Database: 269.13.18/1007 - Release Date:
13/09/2007
9:48 PM

Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.5.487 / Virus Database: 269.13.18/1007 - Release Date:
13/09/2007
9:48 PM

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs



More information about the Ozaprs mailing list