[OZAPRS] Satgate settings

[Mike Alsop]

Hi guys

A little help needed. I have changed the setup here to make the gate in
Katherine a Satgate as I am sure it will be more useful. I am getting
good signals from ISS, but nothing is happening so I am assuming I have
something wrong in the TNC setup.

I am using and older MFJ-1270B (stock standard) and running aprsd in
Linux. I am using the following line in the INIT.TNC file:

UNPROTO APRS VIA ARISS,SGATE,WIDE2-1

I think this is where the problem maybe.

i am using port 10149 on australia2.aprs2.net

Any help appreciated.

Mike
VK8ZMA
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs