[OZAPRS] New Paradigim

[Richard Hoskin]

That's right Andrew,

'Fill-In' Digipeaters such as VK5ATN-1 should use the alias path setting
of
WIDE1-1 and add a '1' overlay to their digi Icon.

Wide Area Digipeaters will digipeat WIDE1-1 and Wide2-1 so a mobiles path
should be set to WIDE1-1,WIDE2-1 for most situation on VHF. (This may vary
slightly from state to state due to the local APRS RF Network conditions.)

See http://web.ew.usna.edu/~bruninga/aprs/fix14439.html for more
information.

Cheers
Richard
VK3JFK

> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
> Behalf Of Terry Neumann
> Sent: Tuesday, 25 September 2007 9:16 AM
> To: VK / ZL APRS Users
> Subject: Re: [OZAPRS] New Paradigim
> 
> Andrew McDade wrote:
> 
> >Im not quite sure whether the reference to Wide1-2 below is correct ?
...
> >Perhaps Wide1-1 ?
> >
> >Regards . .Andrew .. VK5EX
> >
> >
> 
> I wondered 'bout that too....
> 
> Incidentally my APRS digi (VK5ATN-1) at Balaklava Heights now uses an
> alias of wide1-1  in the furtherance of the new 'rules'.  SA users (and
> interstate visitors of course) should include this in their path if they
> wish to be relayed when travelling through the northern Adelaide plains
> and up to the Snowtown - Paskeville area.   I think this is the only
> non-intelligent digi in this part of the world (poor old simple KPC-3),
> but it works for me, and I don't mind sharing it.
> 
> 73
> Terry
> VK5ATN
> 
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs