[OZAPRS] VK4IE possible error

Richard Hoskin vk3jfk at amsat.org
Mon Sep 24 18:43:06 EST 2007


Brian,

If the 'New-Paradigm' was implemented it may help with some of the path
problems. At the very least it would bring QLD into line with the latest
VK
/ World path standards.

Cheers
Richard
VK3JFK


> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
> Behalf Of Brian Beamish
> Sent: Monday, 24 September 2007 4:21 PM
> To: VK / ZL APRS Users
> Subject: Re: [OZAPRS] VK4IE possible error
> 
> Hi
> 
> VK4IE-3's Relay,VK4GME-3 etc etc and those sent similarly I guess by
other
> VHF Operators could be the cause one of the problems that is being
> experienced in this area.
> 
> VK4IE's RELAY, VK4GME-3, etc etc beacon I am sure would be being
> digipeated
> by two possibly three digipeaters one of which being VK4GME-3 with other
> one
> or possibly two also digipeating the RELAY, VK4GME-3 etc etc all
clashing
> with each other all digipeating the same beacon all trying to digipeat
> through VK4GME-3 and if the parameters within the digpeaters are setup
> correctly as I feel they would be one after the other as each beacon
would
> hold up the RX on the other digpeater once quite that digpeater's RX
would
> drop out and it would send that beacon and so on, two, three or  more
> times
> the necessary traffic.
> 
> I would personally locally suggest that RELAY,WIDE only be used although
I
> have been off VHF APRS for some years to return when things are sorted
out
> but I do recall reading some where that the use of RELAY may no longer
the
> correct way to go?
> 
> 73 Brian VK4BBS
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs



More information about the Ozaprs mailing list