[OZAPRS] Working ISS & PCSAT
Richard Hoskin
vk3jfk at amsat.org
Sun Sep 23 09:39:14 EST 2007
To cover all possibilities with ground station configurations the
Recommended path for ISS is;
UNPROTO APRS via ARISS,SGATE,WIDE2-1
If you run a Kenwood use the path setting of;
ARISS,SGATE,WIDE2-1
For UI-View the Unproto Address would be;
APRS,ARISS,SGATE,WIDE2-1
These will work for any APRS Satellite that supports the ARISS alias for
digipeating.
IF the APRS Satellite supports a different alias remove ARISS and replace
it
with the recommended one for the APRS Satellite you are using.
Cheers
Richard
VK3JFK
> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
> Behalf Of Andrew Rich
> Sent: Sunday, 23 September 2007 9:21 AM
> To: VK / ZL APRS Users
> Subject: Re: [OZAPRS] Working ISS & PCSAT
>
> 1. The international space station is running an alias of "ARISS"
>
> 2. The APRS spec says your source should reflect the type of system you
> are
> originating from
>
> 3. An agreement has been made that sat stuff shall have the alias of
> "SGATE"
> added.
>
> UNPROTO <your system type> via ARISS
> UNPROTO <your system type> via ARISS,SGATE (via ISS and then a satgate)
>
>
> Therefore, you can use :-
>
>
> UNPROTO CQ via ARISS
> UNPROTO CQ via ARISS,SGATE
>
> The important thing is to get the "ARISS" part right
>
>
--------------------------------------------------------------------------
> --
> Andrew Rich VK4TEC
> vk4tec at people.net.au <mailto:vk4tec at people.net.au>
> http://www.tech-software.net
>
>
>
>
> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au]On
> Behalf Of Ian Mills
> Sent: Sunday, 23 September 2007 9:13 AM
> To: ozaprs at aprs.net.au
> Subject: [OZAPRS] Working ISS & PCSAT
>
>
> Andrew,
>
> To clear any confusion, exactly what is the correct unproto path to use
as
> you would need to enter into a d7 etc?
>
> Has anyone had any luck in being heard by PC-SAT rather than ISS? I see
on
> FindU heard stations on ISS http://www.ariss.net in Australia but none
on
> PCSAT http://pcsat.aprs.org
>
> Thanks
> Ian
> vk2him
>
>
>
> >Message: 5
> >Date: Sat, 22 Sep 2007 18:45:26 +1000
> >From: "Andrew Rich" <vk4tec at people.net.au>
> >Subject: [OZAPRS] Wokring ISS
> >To: "ozaprs" <ozaprs at aprs.net.au>
> >Message-ID: <LGEKIKIAKJPNFGILGJBBGEAGDLAA.vk4tec at people.net.au>
> >Content-Type: text/plain; charset="iso-8859-1"
> >
> >You need to set your unproto path to "SOMETHING via ARISS,SGATE"
> >
> >I just saw one station trying with a path of "ARISS via SGATE"
> >
> >VK4TDI>ARISS,SGATE: <<UI>>:=2729.95S/15259.45E-ingramtech.com (wrong)
> >
> >VK4TEC>APU25N,ARISS,SGATE:
<UI>:=2734.44S/15306.20E`vk4tec at people.net.au
> >
> >That is not going to go anywhere
> AWA Limited
>
> **********************************************************************
> This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they
> are addressed. If you have received this email in error please notify
> the system manager.
> **********************************************************************
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
>
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.5.485 / Virus Database: 269.13.16/1004 - Release Date:
> 12/09/2007
> 5:22 PM
>
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.5.485 / Virus Database: 269.13.16/1004 - Release Date:
> 12/09/2007
> 5:22 PM
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
More information about the Ozaprs
mailing list