[OZAPRS] MFJ1278B for APRS
FLECK, Wolfgang
wolfgang.fleck at baesystems.com
Mon Sep 10 07:25:31 EST 2007
I have just put my MFJ1278 back into service and it works perfectly plus
I have the other radio port to get onto HF. Can anyone remember which
program
to use for decoding RTTY FAX etc.?
73 Bob VK2BYF
-----Original Message-----
From: Gavin Rogers [mailto:grogers at vk6hgr.echidna.id.au]
Sent: Thursday, September 06, 2007 2:06 PM
To: VK / ZL APRS Users
Subject: [OZAPRS] MFJ1278B for APRS
Hi all.
I've been very fortunate to have been given an MFJ1278B multimode TNC
with an on-board DSP filter.
At my QTH I have terrible problems with popping/crackling/frying QRM on
VHF due (mostly, I suspect) to power line interference.
Not having used a DSP TNC before, I'm wondering if it's worth putting
this TNC on my APRS port. Will the DSP will be able to help getting a
higher percentage of APRS packets successfully decoded?
Cheers,
Gavin
VK6HGR
--
Gavin Rogers | Amateur radio station VK6HGR
http://www.livingwaters.com/good | http://vk6hgr.ampr.org/
ICQ: 17230395 Skype/MSN/Email: grogers at vk6hgr.echidna.id.au
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
More information about the Ozaprs
mailing list