[OZAPRS] New Kantronic KP3 and GPS arrived

[Mike Townsend]

Not sure about ARU25N. If you want to see the path your signal took use 
'APRS,TRACE2-2' or 'APRS,WIDE,WIDE' with UI-view from home until the new 
paradigm is implimented in the Sydney region. If you use WIDE*-* it will
be 
digipeated but not show by who. Also please do not use RELAY or WIDE1-1 in

your path if not operating mobile. If mobile and want to see the path use 
RELAY,TRACE2-2 or RELAY,TRACE2-1

Confused?
Have fun, Mike.



----- Original Message ----- 
From: "Shaun Pitcher" <spitcher at energy.com.au>
To: <ozaprs at aprs.net.au>
Sent: Saturday, October 27, 2007 7:16 AM
Subject: Re: [OZAPRS] New Kantronic KP3 and GPS arrived


>
> Thanks Mike,
>
> Not quite what I was after however dam useful, so I have down loaded the
> UIview addons.
>
> I was more interested in the path the packet took to the Igate, more so
> than the path of the car, however as above this is very useful.  I
wanted
> to make sure I had my path and  Wides set correctly.  I have found
> multiple locations for paths.  Unproto is set correctly (APRS v
> wide1-1,wide2-1) however after connecting the TNC to UIview it has
placed
> ARU25N in another path that I am yet to work out. Apparently this is the
> version of UIview.
>
> Once it is running I can see what the actual TNC will do in a mobile
> environment (I suspect this other path is used for the internet direct
> connect.)
>
>
>
> Regards,
> Shaun Pitcher
> spitcher at energy.com.au
>
>
>
>
>
> "Mike Townsend" <tasit at tpg.com.au>
> Sent by: ozaprs-bounces at aprs.net.au
> 27/10/2007 06:54 AM
> Please respond to
> VK / ZL  APRS Users  <ozaprs at aprs.net.au>
>
>
> To
> "VK / ZL  APRS Users" <ozaprs at aprs.net.au>
> cc
>
> Subject
> Re: [OZAPRS] New Kantronic KP3 and GPS arrived
>
>
>
>
>
>
> Hello Shaun,
> Not sure if this is what your after.
>> So my question is how do I monitor its path?
>
> http://www.db0anf.de/app/aprs/stations/   this web site shows some nice
> statistics and has a mobile activity page that shows position plots
along
> with a snail trail. If you use AGWTracker this has the position plot and
> snailtrail option built in. If using UI-view you will have to get a copy
> of
> the add on UI-Route from here http://www.apritch.myby.co.uk/uiroute.htm
.
>
> Mike.
>
> ----- Original Message ----- 
> From: "Shaun Pitcher" <spitcher at energy.com.au>
> To: <ozaprs at aprs.net.au>
> Sent: Friday, October 26, 2007 9:22 PM
> Subject: [OZAPRS] New Kantronic KP3 and GPS arrived
>
>
>>
>> Ladies and Gents,
>>
>> My gear has arrived, much to the disappointment of the misses (Ham
widow
>> again).  Also purchased a FM900 however am unsure of the frequencies it
> is
>> programmed to.  It has a big sticker on the top claiming ch9 for APRS
>> however nothing heard here at Wahroonga, which is line of site to
>> VK2JPJ-1.  Nothing heard on the 2m in the kitchen either when I put it
>> into beacon mode.  I think it may have been programmed for the old VK3
>> frequency as that is where it came from.  Freq counter is in a box way
>> under the house.
>>
>> Anyway, with a few connectors from Jaycar tomorrow I will probably, if
> the
>> SAF does not get to low (Spouse Approval Factor), be able to get some
>> location packets transmitted from it.
>>
>> So my question is how do I monitor its path?  Andrew R seems to produce
>> amazing graphs and I was wanting to keep a track on myself to see all
is
>> going well?
>>
>> I might also ask you guys to give me some feedback if it is not set
>> operating correctly.
>>
>> Fingers crossed.
>>
>> Regards,
>> Shaun Pitcher   VK2XPP-9
>> spitcher at energy.com.au
>>
>>
>>
>
--------------------------------------------------------------------------
--------------
>> This e-mail may contain confidential or privileged information.   If
you
>
>> have received it in error, please notify the sender immediately via
> return
>> e-mail and then delete the original e-mail. EnergyAustralia has
> collected
>> your business contact details for dealing with you in your business
>> capacity. More information about how we handle your personal
> information,
>> including your right of access is contained at
http://www.energy.com.au.
>> _______________________________________________
>> Ozaprs mailing list
>> Ozaprs at aprs.net.au
>> http://aprs.net.au/mailman/listinfo/ozaprs
>>
>>
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.503 / Virus Database: 269.15.11/1093 - Release Date:
>> 25/10/2007 5:38 PM
>>
>>
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
>
>
>
>
--------------------------------------------------------------------------
--------------
> This e-mail may contain confidential or privileged information.   If you

> have received it in error, please notify the sender immediately via
return 
> e-mail and then delete the original e-mail. EnergyAustralia has
collected 
> your business contact details for dealing with you in your business 
> capacity. More information about how we handle your personal
information, 
> including your right of access is contained at http://www.energy.com.au.
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.15.11/1093 - Release Date: 
> 25/10/2007 5:38 PM
>
> 

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs