[OZAPRS] New Kantronic KP3 and GPS arrived

[Shaun Pitcher]

Thanks Mike,

Not quite what I was after however dam useful, so I have down loaded the 
UIview addons.

I was more interested in the path the packet took to the Igate, more so 
than the path of the car, however as above this is very useful.  I wanted 
to make sure I had my path and  Wides set correctly.  I have found 
multiple locations for paths.  Unproto is set correctly (APRS v 
wide1-1,wide2-1) however after connecting the TNC to UIview it has placed 
ARU25N in another path that I am yet to work out. Apparently this is the 
version of UIview.

Once it is running I can see what the actual TNC will do in a mobile 
environment (I suspect this other path is used for the internet direct 
connect.)



Regards, 
Shaun Pitcher   
spitcher at energy.com.au 





"Mike Townsend" <tasit at tpg.com.au> 
Sent by: ozaprs-bounces at aprs.net.au
27/10/2007 06:54 AM
Please respond to
VK / ZL  APRS Users  <ozaprs at aprs.net.au>


To
"VK / ZL  APRS Users" <ozaprs at aprs.net.au>
cc

Subject
Re: [OZAPRS] New Kantronic KP3 and GPS arrived






Hello Shaun,
Not sure if this is what your after.
> So my question is how do I monitor its path?

http://www.db0anf.de/app/aprs/stations/   this web site shows some nice 
statistics and has a mobile activity page that shows position plots along 
with a snail trail. If you use AGWTracker this has the position plot and 
snailtrail option built in. If using UI-view you will have to get a copy 
of 
the add on UI-Route from here http://www.apritch.myby.co.uk/uiroute.htm .

Mike.

----- Original Message ----- 
From: "Shaun Pitcher" <spitcher at energy.com.au>
To: <ozaprs at aprs.net.au>
Sent: Friday, October 26, 2007 9:22 PM
Subject: [OZAPRS] New Kantronic KP3 and GPS arrived


>
> Ladies and Gents,
>
> My gear has arrived, much to the disappointment of the misses (Ham widow
> again).  Also purchased a FM900 however am unsure of the frequencies it 
is
> programmed to.  It has a big sticker on the top claiming ch9 for APRS
> however nothing heard here at Wahroonga, which is line of site to
> VK2JPJ-1.  Nothing heard on the 2m in the kitchen either when I put it
> into beacon mode.  I think it may have been programmed for the old VK3
> frequency as that is where it came from.  Freq counter is in a box way
> under the house.
>
> Anyway, with a few connectors from Jaycar tomorrow I will probably, if 
the
> SAF does not get to low (Spouse Approval Factor), be able to get some
> location packets transmitted from it.
>
> So my question is how do I monitor its path?  Andrew R seems to produce
> amazing graphs and I was wanting to keep a track on myself to see all is
> going well?
>
> I might also ask you guys to give me some feedback if it is not set
> operating correctly.
>
> Fingers crossed.
>
> Regards,
> Shaun Pitcher   VK2XPP-9
> spitcher at energy.com.au
>
>
> 
--------------------------------------------------------------------------
--------------
> This e-mail may contain confidential or privileged information.   If you


> have received it in error, please notify the sender immediately via 
return 
> e-mail and then delete the original e-mail. EnergyAustralia has 
collected 
> your business contact details for dealing with you in your business 
> capacity. More information about how we handle your personal 
information, 
> including your right of access is contained at http://www.energy.com.au.
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.15.11/1093 - Release Date: 
> 25/10/2007 5:38 PM
>
> 

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs



--------------------------------------------------------------------------
--------------
This e-mail may contain confidential or privileged information.   If you
have received it in error, please notify the sender immediately via return
e-mail and then delete the original e-mail. EnergyAustralia has collected
your business contact details for dealing with you in your business
capacity. More information about how we handle your personal information,
including your right of access is contained at http://www.energy.com.au.
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs