[OZAPRS] Mobile installation question

[Gordon Taylor]

 My D700 is currently being looked at to see if there is a way to improve
the tinny audio, the factory mic mod makes no difference.  Apart from that
they are so good I am thinking of buying another one...



Regards,

Gordon Taylor VK4VP
________________________________

Secretary
Sunshine Coast Amateur Radio Club
secretary at vk4wis.org 
85 Godfreys Rd, Bli Bli QLD 4560 
Australia 
www.vk4wis.org 
	 	

-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of Andrew Rich
Sent: Wednesday, 31 January 2007 6:46 PM
To: VK / ZL APRS Users
Subject: Re: [OZAPRS] Mobile installation question

I use a D700 - do APRS and chat on UHF every morning.

-----------------------------------------
Andrew Rich
Amateur radio callsign VK4TEC
email: vk4tec at tech-software.net <mailto:vk4tec at tech-software.net>
web: http://www.tech-software.net
Brisbane AUSTRALIA



-----Original Message-----
From: vk3xci at aanet.com.au [mailto:vk3xci at aanet.com.au]
Sent: Wednesday, 31 January 2007 2:41 PM
To: VK / ZL APRS Users
Subject: Re: [OZAPRS] Mobile installation question



G'day,
nice callsign, beats me someone else hadn't snaffled it.

I haven't really found an effective way, other than borrowing Ron VK3ECV
's
Kenwood D 700, which doesn't entirely fill the bill,


Anyone?

Norm VK3XCI


> Hi, I'm pretty new to amateur radio and am looking to get my car set 
> up for APRS. I'm unclear on what the best approach is though. Ideally 
> I'd like to join in the daily commute chat while my APRS system is 
> also doing its thing. Presumably I'll need two radios for that, one 
> for APRS and one for voice. Will I have problems with front end 
> overload or intermodulation distortion if I'm running two transceivers 
> at once? What do other people do to avoid these issues?
>
> Is it best to avoid chatting on the 2m band entirely if my APRS 
> transceiver is occasionally sending on it? Or can I use some kind of 
> duplexer to avoid these issues?
>
> My second question - is it possible to set both transceivers up to 
> operate on the same antenna? I'd like to keep the number of antennas 
> down if I can.
>
> Am I completely off the track here? What is everyone else out there
doing?
>
> Thanks,
> Zik Saleeba
> VK3MHZ
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
>


_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs


_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs

This message, any attachment and response string are confidential 
and may be legally privileged. It is intended only for the use 
of the parties to whom it is addressed. If you are not the addressee 
indicated in this message please notify the sender immediately 
by reply email and destroy this message. All information and 
attachments remain the property of PARASYN Controls.


_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20070131/0db0d7f3/attachment.htm