[OZAPRS] Using a thd7ag as a fill-in digi using uiview32

[Richard Hoskin]

Hi Ian,

The D7 will not work as a digi due to its very small internal buffer (1
bite
from memory).

If you get it to run in KISS mode as a standard home station you are doing
well.

Cheers
Richard
VK3JFK


> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
> Behalf Of Ian Mills
> Sent: Monday, 10 December 2007 9:16 PM
> To: 'ozaprs at aprs.net.au'
> Subject: [OZAPRS] Using a thd7ag as a fill-in digi using uiview32
> 
> Dear all,
> 
> I am trying to setup my thd7ag as a fill-in digi using uiview32 without
> luck.
> 
> The d7 works fine when connected to uiview and sends my beacon and
> receives positions fine when setup as a d7. I read somewhere that
> digipeating only works when in KISS mode, however I can't seem to get it
> to work.
> 
> Before I spend more time, is what I'm trying to do possible?
> Cheers
> Ian vk2him
> 
> AWA Limited
> 
> **********************************************************************
> This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they
> are addressed. If you have received this email in error please notify
> the system manager.
> **********************************************************************
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs