[OZAPRS] D700 set up

[Richard Hoskin]

Gday Roger,

Your settings are close but it looks like you have SSID pathing on

Try

UISSD OFF
UIFLOOD TAS,32,ID
UITRACE WIDE,32
UIDIGI WIDE1-1 (from the front panel of the radio)


(From WB4APR)
You cannot change the settings of the UIFLOOD and
UITRACE parameters from the front panel, but the
menu command to turn off digipeating should disable
all digipeating modes including them.


Using an external PC to set the D700 UITRACE
or UIFLOOD parameter to support WIDEn-N is
dangerous because of the potential for these
thousands of mobiles to then be accidentally
left with DIGI on and cause unnecessary QRM.

My recommendation for the D700 is simply:

To support local events, use the front panel
UIDIGI alias list to add WIDE1-1, WIDE2-2
and WIDE2-1 for the duration of the event,
and then after the event, use the front panel
to remove them and turn DIGI off.

Cheers
Richard
VK3JFK


> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
> Behalf Of vk7arn
> Sent: Friday, 6 April 2007 10:55 AM
> To: OzAPRS
> Subject: [OZAPRS] D700 set up
>
> Can anybody sort me out.  I've set up a D700 to be used as a portable
digi
> (VK7BW-1) during Targa.  It will be switched on when on location and off
> when
> leaving i.e no mobile digi and other nasties.
>
> It seems to be digi-ing OK
>
>  1:Fm VK5AH-4 To APND12 Via VK7ARN-4,VK7BW-1* <UI pid=F0 Len=62
> >[08:26:38]
> >Digi_ned for Windows: HF/VHF GateWay system - GATE ECHO TUNE
>
>  1:Fm VK7RAD To APNU19-3 Via VK7RHT,VK7BW-1,WIDE2* <UI pid=F0 Len=56
> >[08:28:43]
> >VK7RAD APRS DIGI SUPPORTS WIDEn-n AND TASn-n 145.175MHz
>
> 1:Fm VK7MBD-2 To APAGW Via VK7BW-1*,TAS3-2 <UI pid=F0 Len=11 >[08:32:45]
> >AGWTRACKER
>
> But when it beacons I'm getting
>
> 1:Fm VK7BW-1 To T1Q2U1 Via TAS3-3 <UI pid=F0 Len=11 >[08:22:27]
> 'IU>l 
#/]
>  1:Fm VK7BW-1 To T1Q2U1 Via TAS3-2 <UI pid=F0 Len=11 >[08:22:28]
> 'IU>l 
#/]
>  1:Fm VK7BW-1 To T1Q2U1 Via TAS3-1 <UI pid=F0 Len=11 >[08:22:29]
> 'IU>l 
#/]
>  1:Fm VK7BW-1 To T1Q2U1 Via VK7BW-1*,TAS3-1 <UI pid=F0 Len=11
>[08:22:31]
> 'IU>l 
#/]
>
> Path is TAS3-3
> Settings are:
> UIFLOOD TAS,30,ID
> UITRACE WIDE
>
> I notice that although UIFLOOD TAS,30,ID is accepted, a DISP indicates
> only the
> TAS,ID is retained.
>
> As you may gather, I'm not on top of this, just trying to make the best
> from
> limited information available.  Help appreciated.
>
> Cheers
>
> Roger vk7arn
>
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs


_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20070406/0bd8ba21/attachment.htm