[OZAPRS] MAXON DM-2550 Radio Information
Richard Hoskin
vk3jfk at amsat.org
Sat Sep 30 13:59:14 EST 2006
FYI
This may be of interest for those of you who have Maxon Data Radios.
Cheers
Richard
VK3JFK
Message: 6
Date: Fri, 29 Sep 2006 21:45:08 +1200
From: Ian ZL1VFO <zl1vfo at yahoo.co.uk>
Subject: [aprssig] Re: MAXON DM-2550
To: aprssig at lists.tapr.org
Message-ID: <13210528528.20060929214508 at yahoo.co.uk>
Content-Type: text/plain; charset=us-ascii
~ Snip ~
> Gudday
> Maxon DM-2550 VHF radio in die cast box.
> Manual says 10.2 Volts, one web site says 11.2 Volts, another says 5
> volts for VCC.
> Confused.
> -----------------------------------------
> Andrew Rich
> Amateur radio callsign VK4TEC
> email: vk4tec at tech-software.net
> web: http://www.tech-software.net <http://www.tech-software.net/>
> Brisbane AUSTRALIA
Gonna confuse you a bit more - I run mine at 10.8 volts. (ZL1VFO-10) I do
know 12V is too much for them, you run the risk of doing in the Tx
transistor.
I probably should make up a dedicated power supply before someone knocks
the
variable one it's on....
73,
Ian ZL1VFO
Across the ditch in Auckland.
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20060930/26d6a6bc/attachment.htm
More information about the Ozaprs
mailing list