[OZAPRS] maxon DM2550 - power requirements

[Richard Hoskin]

I also found this web page.

http://www.maxon.com.au/products/industrial/industrial-discontinued.asp

Take a look at the SP-2000 information. I think it's also applicable to
the
DM-2550

Cheers
Richard
VK3JFK


> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
> Behalf Of Matt
> Sent: Sunday, 1 October 2006 12:49 PM
> To: ozaprs at aprs.net.au
> Subject: [OZAPRS] maxon DM2550 - power requirements
> 
> Hi
> 
> 
> 
> If you go to http://www.qsl.net/zl1vk/MaxonRegulator.html
> 
> 
> 
> You will find a voltage reg mod for them and a few other mods
> 
> 
> 
> Cheers
> 
> 
> 
> Matt
> 
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20061001/020791e3/attachment.htm