[OZAPRS] information on APRS in Australia.

[Mike Zwingl oe3mzc]

Gents,
can anyone tell me, what would be the maximum area covered by ISS over VK6

and VK8?
If I travel Westcoast and I-Gate is East Coast, will it receive my
position 
and take it to the internet?

hw?
vy 73 de oe3mzc

----- Original Message ----- 
From: "Richard Hoskin" <vk3jfk at amsat.org>
To: "'VK / ZL APRS Users'" <ozaprs at aprs.net.au>
Sent: Monday, June 19, 2006 10:52 AM
Subject: Re: [OZAPRS] information on APRS in Australia.


>
> Gents,
>
> To complement HF APRS you might want to consider APRS via ISS.
> ISS is very easy to access with a HH and a 1/4 wave antenna on the roof
of
> the car. There are at least 2 permanent ground stations in Eastern VK on

> the
> downlink. The ISS digi is off occasionally during school contacts,
special
> events and space ship dockings. You should be able to get an idea of the
> operational schedule from http://www.issfanclub.com/
>
> The path to use for HF is GATE,WIDE and for ISS is SGATE,WIDE You can 
> easily
> put each path in one of the TT3's 2 profiles. www.aprs.net.au has some
> information on these systems.
>
> It would also be worth connecting to APRS-IS server 
> first.aprs.net.au:14579
> to get an idea of VHF Digi's that may cover the areas where you expect
to
> travel. All VK except VK3 (Victoria) operates on 145.175Mhz. Most of VK3
> operates on 144.900Mhz.
>
> Cheers
> Richard
> VK3JFK
>
>
>> -----Original Message-----
>> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
>> Behalf Of zlscanners
>> Sent: Monday, 19 June 2006 6:20 PM
>> To: vk4tec at tech-software.net; VK / ZL APRS Users
>> Subject: Re: [OZAPRS] information on APRS in Australia.
>>
>> Thanks for the link Can I point out that the links I am trying to look
>> at don't work
>>
>>
>> Detailed State information on APRS.
>>
>> VK6  just comes back with ERROR The requested URL could not be
retrieved
>>
>>
>> and the VK4 "tries" to show a findu a map
>>
>> Anyway thanks for the frequency and the path now just have to work out
>> if that will work in Perth and Brisbane and up to Rockhampton
>>
>>
>> Thanks Mike oe3mzc,VK3FPF/6 for your input I will only have VHF/UHF all
>> the best for your trip.
>>
>>
>> Kiely
>> ZL1KM
>>
>> Andrew Rich wrote:
>> > Use 145.175 MHz
>> >
>> > Use path of RELAY,WIDE
>> >
>> > http://aprs.net.au/
>> >
>> >
>> >
>> >
>> >
>> > -----------------------------------------
>> > Andrew Rich
>> _______________________________________________
>> Ozaprs mailing list
>> Ozaprs at aprs.net.au
>> http://aprs.net.au/mailman/listinfo/ozaprs
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
> 

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs