[OZAPRS] APRS HF beacon rates
Andrew McDade
amcdade at iprimus.com.au
Sun Jul 9 10:33:30 EST 2006
Gday Richard and others,
I have noticed this a bit lately too. I think though that the main problem
might be with a bit of misunderstanding with regards to the Smart
Beaconing
options in the later trackers. i.e., TinyTtrak3 , opentrak, etc. It can be
a
be convoluted to say the least. Its no good just leaving the options for
this set to default, Especially on HF. I personally don't like smart
beaconing at all as I think that on a busy network the benefits are
overshadowed by the excess of posit beacons created. We've found that a
constant mobile rate of 2-3 minutes for VHF and 5-10 minutes for HF works
ok
generally. Then a stationary rate of 20-30 minutes for both VHF and HF
seems
to not cause any problems. These sort of posit timings can be configured
in
a fashion within the smart beaconing operation. I think perhaps we need to
look at creating a standard set of options for those people running Smart
beaconing trackers for both HF and VHF and perhaps post them on the
various
aprs help pages on the net.
Regards . Andrew .. VK5EX
----- Original Message -----
From: "Richard Hoskin" <vk3jfk at amsat.org>
To: "'VK / ZL APRS Users'" <ozaprs at aprs.net.au>
Sent: Sunday, July 09, 2006 9:25 AM
Subject: [OZAPRS] APRS HF beacon rates
Gday,
I've noticed a lot of station running HF with excessive beacon/posit
rates.
You are sharing this single frequency with hundreds of other operators
around the world, with skip conditions you never know where your signal
will
go.
Remember to consider all other users of the HF network .
Using a beacon rate of ½ to 1 minutes is ok for tuning and testing for a
short time, however it is NOT ok the leave your tracker beaconing at this
rate continuously.
When you have finished tuning Remember to so set your beacon rate to 10
minutes as per the VK HF Guide
http://www.aprs.net.au/hf_aprs_information.htm
Here is just one example:-
Fm VK2***-15 To SPP8W5 Via GATE,WIDE <UI pid=F0 Len=25 >[11:27:15]
`M):l ___"5l}Ph0428242024
Fm VK2***-15 To SPP8W9 Via GATE,WIDE <UI pid=F0 Len=13 >[11:27:47]
`M)lp{&__"5l}
Fm VK2***-15 To SPP8Y1 Via GATE,WIDE <UI pid=F0 Len=13 >[11:28:03]
`M*_p{=__"5l}
Fm VK2***-15 To SPQ2V1 Via GATE,WIDE <UI pid=F0 Len=13 >[11:38:57]
`M3#p{,__"5w}
Fm VK2***-15 To SPQ2V9 Via GATE,WIDE <UI pid=F0 Len=13 >[11:39:12]
`M3;p{$__"5w}
Fm VK2***-15 To SPQ2X9 Via GATE,WIDE <UI pid=F0 Len=13 >[11:40:16]
`M4:q!(__"5y}
Fm VK2***-15 To SPQ3P0 Via GATE,WIDE <UI pid=F0 Len=13 >[11:40:32]
`M4Mp{?__"5x}
Fm VK2***-15 To SPQ3Q7 Via GATE,WIDE <UI pid=F0 Len=13 >[11:40:48]
`M4]q!E__"5y}
Fm VK2***-15 To SPQ3S4 Via GATE,WIDE <UI pid=F0 Len=13 >[11:41:03]
`M4mq!B__"5y}
Fm VK2***-15 To SPQ3U3 Via GATE,WIDE <UI pid=F0 Len=13 >[11:41:35]
`M56q!!__"6!}
Fm VK2***-15 To SPQ3U9 Via GATE,WIDE <UI pid=F0 Len=13 >[11:41:52]
`M5OpI___"5y}
Fm VK2***-15 To SPQ3U6 Via GATE,WIDE <UI pid=F0 Len=13 >[11:42:07]
`M5ao4c__"5y}
Fm VK2***-15 To SPQ3U2 Via GATE,WIDE <UI pid=F0 Len=13 >[11:42:23]
`M5qo4c__"5x}
Fm VK2***-15 To SPQ3T7 Via GATE,WIDE <UI pid=F0 Len=13 >[11:42:39]
`M6_o*c__"5x}
Cheers
Richard
VK3JFK
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.10/383 - Release Date: 7/7/2006
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20060709/0876a424/attachment.htm
More information about the Ozaprs
mailing list