[OZAPRS] Decoding HF APRS

[Andrew Rich]

you lost me, so how does this help with your receiver issues ?

-----------------------------------------
Andrew Rich
Amateur radio callsign VK4TEC
email: vk4tec at tech-software.net <mailto:vk4tec at tech-software.net> 
web: http://www.tech-software.net
Brisbane AUSTRALIA 



-----Original Message-----
From: Rob [mailto:vk4hab at rfcomms.com.au]
Sent: Saturday, 8 July 2006 10:00 AM
To: ozaprs at aprs.net.au
Subject: [OZAPRS] Decoding HF APRS


For your info this is what kantronics Tech support send me regarding the 
mark and space tones

The AFSK tones transmitted on HF by the KAM XL are defined by its 
commands MARK, SPACE, and SHIFT.

In Packet mode the Mark tone defaults to 2125 Hz, and the Space tone 
defaluts to 2295 Hz.

But you can set those tones to any one between 50 and 4000 Hz, as long 
as Space is a higher frequency tone than Mark.

If you set the SHIFT command to MODEM, the Mark and Space tone settings 
will be used in all two-tone HF modes.

Some of the older KAM models used different default tones for HF packet. 
They used 1600 Hz for mark and 1800 for space, but they could also be 
set to any tones between 50 and 4000 Hz.

You might say that the range of tones settings can be 50 to 3999 for 
mark, and 51 to 4000 for space, in the KAMs.

Ken
Kantronics Technical Service

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs


_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20060708/b19bcf45/attachment.htm