[OZAPRS] Painting Aluminium

[Howard Small]

You should use an etch primer the put on your top coat.

Howard 

<-----Original Message-----
<From: ozaprs-bounces at aprs.net.au 
<[mailto:ozaprs-bounces at aprs.net.au] On Behalf Of Andrew Rich
<Sent: Friday, 24 February 2006 22:24
<To: ozaprs
<Subject: [OZAPRS] Painting Aluminium
<
<Gudday.
<
<I am attempting to spray paint aluminium plate.
<
<I just spray painted the surface and it flakes off.
<
<Am I missing something ? Is there a primer you use to prep the 
<surface so the paint will not chip so easily ?
<
<
<-----------------------------------------
<Andrew Rich
<Amateur radio callsign VK4TEC
<email: vk4tec at tech-software.net
<web: http://www.tech-software.net
<Brisbane AUSTRALIA
<
<_______________________________________________
<Ozaprs mailing list
<Ozaprs at aprs.net.au
<http://aprs.net.au/mailman/listinfo/ozaprs
<
<--
<No virus found in this incoming message.
<Checked by AVG Free Edition.
<Version: 7.1.375 / Virus Database: 268.0.0/268 - Release Date: 
<23/02/2006
< 
<

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.0.0/268 - Release Date: 23/02/2006
 

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs