[OZAPRS] UI View32

Peter VK1NFI vk1nfi at netspace.net.au
Fri Dec 22 18:58:57 EST 2006


At the moment the feed to CSU-1 is from Ginini, which is fed from the 
I-Gate set-up of 1KCM,  he is gating vk3, vk2, vk1 (at least that is 
what I am seeing I will confirm)
Tim  you should be getting the same feed I am....???  The new PROM for 
the CSU digi is on its way

John, I am unsure as to your problem, but when I am in Nowra I run NFI-8 
on my laptop and get the same problem on an inside antenna.  When I go 
to an out side antenna (on the car) I get the RGI-1 feed.
I suspect there is some issue with the config of the I-Gate that feeds 
AMW-1??  Which would be the local feed for you I would imagine?

Tim,  your home path at the moment should be along the lines of 
APRS,WIDE2-2.  However this would not affect your RX feed, just your 
TX.  I suggest waiting until the new CSU-1 comes online.  If there are 
still probs well we will look at it then.  (BTW I will be in Wagga for 7 
weeks from the 24JAN06 so we might catch up...)  Also your HLT-9 station 
gets out I can see you here in VK1.

Hooroo all and Merry Christmas

Pete VK1NFI
Renee and Tim Logan wrote:
> Yep seeing the same here John, bit of shame really.
> ----- Original Message ----- 
> From: "John Simon" <jrsimon at ozemail.com.au>
> To: "VK / ZL APRS Users" <ozaprs at aprs.net.au>
> Sent: Friday, December 22, 2006 1:10 PM
> Subject: Re: [OZAPRS] UI View32
>
>
>   
>> Pity as I only have sixteen stations showing on my VHF screen at the
>>     
> moment.
>   
>> Time is 0100Z.  The maximum I've seen was twenty.   Gawd I hate
progress
>> sometimes.  B-)
>>
>>                         73, John de VK2XGJ
>>        Women and cats do as they please
>>       Men and dogs  have to  get used to the idea.
>>
>>
>>
>> ----- Original Message ----- 
>> From: "Geoff" <vk2xjg at iinet.net.au>
>> To: "'VK / ZL APRS Users'" <ozaprs at aprs.net.au>
>> Sent: Friday, December 22, 2006 11:36 AM
>> Subject: Re: [OZAPRS] UI View32
>>
>>
>>     
>>> John,
>>>
>>> I think both the VK1 and VK2 groups have dropped the broadcast of VK3
>>> traffic to RF, due to the sheer saturation of the frequencies due to
the
>>> amount of traffic.   In the early days it was great to see all of the
>>> traffic on RF, but now that there are so many users we need to cut
back
>>>       
> on
>   
>>> what is sent to RF so that mobiles get a chance to actually get into
the
>>> network :-)
>>>
>>> I know the upgrade of VK2CSU-1 in Wagga from a standalone KPC-3 to a
>>>       
> full
>   
>>> UIDIGI with the new code is very close to being completed.   As for
the
>>> Sydney I-Gate, I no longer look after that, I believe it is Mike
VK2INT
>>> now
>>> running that service.
>>>
>>> Regards,
>>> Geoff  VK2XJG
>>> first.aprs.net.au / second.aprs.net.au
>>>
>>>
>>> -----Original Message-----
>>> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au]
On
>>> Behalf Of John Simon
>>> Sent: Friday, 22 December 2006 10:31 AM
>>> To: VK / ZL APRS Users
>>> Subject: Re: [OZAPRS] UI View32
>>>
>>> I haven't seen an answer to this question yet.  Or did I miss
something.
>>> At the moment I have no VK3 showing on the VHF screen.  What has
>>>       
> happened?
>   
>>> Can we fix it?
>>>
>>>                        73, John de VK2XGJ
>>>       Women and cats do as they please
>>>      Men and dogs  have to  get used to the idea.
>>>
>>>
>>>
>>> ----- Original Message ----- 
>>> From: "Renee and Tim Logan" <reneetimlogan at optusnet.com.au>
>>> To: "VK / ZL APRS Users" <ozaprs at aprs.net.au>
>>> Sent: Sunday, December 10, 2006 1:47 PM
>>> Subject: [OZAPRS] UI View32
>>>
>>>
>>>       
>>>> Gday Guys, another question for the group, as im new to this, im
runnig
>>>> UI
>>>>         
>>>> View32 with AGW Engine and a scanner, I am only seeing traffic from
the
>>>> VK1 area and my local VK2 area at Wagga, Any ideas why this might be
?
>>>>         
> I
>   
>>>> am listening to either VK2KAW or VK2CSU,  I cant listen direct to
>>>>         
> Ginini,
>   
>>>> so must be getting the VK1 traffic through VK2CSU off Ginnini. The
>>>> settings in station setup that I should be running are what I think
may
>>>> be
>>>>         
>>>> my problem.  The Wagga group need to do an upgrade to our Digipeater
>>>>         
> for
>   
>>>> the new setup to bring us inline with everyone else, could this be
>>>> related
>>>>         
>>>> to my problem ?
>>>> Thanks in advance Tim VK2HLT
>>>> _______________________________________________
>>>> Ozaprs mailing list
>>>> Ozaprs at aprs.net.au
>>>> http://aprs.net.au/mailman/listinfo/ozaprs
>>>>
>>>>
>>>> -- 
>>>> No virus found in this incoming message.
>>>> Checked by AVG Free Edition.
>>>> Version: 7.1.409 / Virus Database: 268.15.15/580 - Release Date:
>>>> 12/8/2006
>>>>
>>>>
>>>>         
>>> _______________________________________________
>>> Ozaprs mailing list
>>> Ozaprs at aprs.net.au
>>> http://aprs.net.au/mailman/listinfo/ozaprs
>>> _______________________________________________
>>> Ozaprs mailing list
>>> Ozaprs at aprs.net.au
>>> http://aprs.net.au/mailman/listinfo/ozaprs
>>>
>>>
>>> -- 
>>> No virus found in this incoming message.
>>> Checked by AVG Free Edition.
>>> Version: 7.1.409 / Virus Database: 268.15.26/597 - Release Date:
>>> 12/21/2006
>>>
>>>
>>>       
>> _______________________________________________
>> Ozaprs mailing list
>> Ozaprs at aprs.net.au
>> http://aprs.net.au/mailman/listinfo/ozaprs
>>
>>     
>
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
>
>   

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20061222/1853f040/attachment.htm 


More information about the Ozaprs mailing list