[OZAPRS] VK2RHR digipeater High Range
Geoff
vk2xjg at iinet.net.au
Wed Aug 16 14:09:54 EST 2006
Hi Karl,
Unfortunately no, all APRS activity is on 145.175. There should be ample
coverage of your area by the existing digipeaters at VK2AMW-1 at Maddens
Plains and VK2JPJ-1 in the CBD (yes, it has phenomenal coverage)
For a mobile setup, you need to set your path to be RELAY,WIDE
That is all you need to set to ensure your packets reach the Igate in
Campbelltown and then onwards into the network.
Regards,
Geoff VK2XJG
-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of Karl Ahamer
Sent: Tuesday, August 15, 2006 20:55
To: 'VK / ZL APRS Users'
Subject: [OZAPRS] VK2RHR digipeater High Range
Hi all,I'm new to the APRS game and have a question.Is it possible to
use the High Range digipeater VK2RHR on 144.950 for APRS input?if so,how
do I have to set my tinytrak to get it to work.If not,what can be done
to enable it?
It would be very useful to have this area covered.
73'
Karl VK2GKA
Mittagong
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20060816/d8ffad6e/attachment.htm
More information about the Ozaprs
mailing list