[OZAPRS] Getting UI-VIEW to Igate ISS traffic ?
Warren VK3BYD
vk3byd at wia.org.au
Sun Mar 13 13:57:22 EST 2005
Hi Chris,
Maybe the position data is not valid as uiview 16 bit will not display it
also.
Warren.
----- Original Message -----
From: "Chris Hill" <chris.hill at crhtelnet.com.au>
To: <ozaprs at marconi.ics.mq.edu.au>
Sent: Sunday, March 13, 2005 11:28 AM
Subject: [OZAPRS] Getting UI-VIEW to Igate ISS traffic ?
Hello all,
In the continuing thread of rebuilding my APRS operations ☺ …
When monitoring 145.800 MHz with a TNC and AGW Packet Engine, I can hear
traffic
from ISS. Eg:
1:Fm RS0ISS-3 To P0PPP0 Via SGATE,WIDE <UI pid=F0 Len=31 >[04:48:57]
'vX
l
'/]APRS/BBS & PACKET ON
1:Fm RS0ISS-3 To P0PPP0 Via SGATE,WIDE <UI pid=F0 Len=31 >[04:49:58]
'vX
l
'/]APRS/BBS & PACKET ON
1:Fm RS0ISS-3 To P0PPP0 Via SGATE,WIDE <UI pid=F0 Len=31 >[04:51:00]
'vX
l
'/]APRS/BBS & PACKET ON
1:Fm RS0ISS-3 To P0PPP0 Via SGATE,WIDE <UI pid=F0 Len=31 >[04:52:01]
'vX
l
'/]APRS/BBS & PACKET ON
1:Fm RS0ISS-3 To P0PPP0 Via SGATE,WIDE <UI pid=F0 Len=31 >[06:25:00]
'vX
l
'/]APRS/BBS & PACKET ON
(The above 5 packets were displayed using AGWTERMTCP).
However, none of this traffic is showing up in UI-VIEW, so of course it
never
gets Igated to the internet.
Presumably there’s at least one more setting that I need to tweak… but I
can’t
find it at present. Any hints?
73 Chris vk6kch
_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs
_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs
More information about the Ozaprs
mailing list