[OZAPRS] HF Satellite gateway operators cross port Digipeater !!

[Tony Hunt]

Here is something that some of the Gateway operators may find of use and
of
interest.. AGW UI-Digi
Check it out . If your seriously running a cross port digi or gateway then
this is the go under Windows.

As it sugests it works with AGW Packet engine..
http://www.raag.org/sv2agw/inst.htm  or
http://www.raag.org/sv2agw/agwuidigi.zip
This digi has been developed to to point that now it is quite usable as a
HF
gateway or satellite gateway.. Ive used and tested it on both.. Ive used
it
in conjunction with Ui-View .. The one big advantage is that each port can
have entriely different behaviour and aliases, not a shared behaviour as
in
Ui-View .. You dont have to have Ui-View running just so the gateway works
or the digi functions.. Ive run it with purely AGW PE and the Digi . Its
still being developed but is quite stable and quite usable. Now it is due
for some more future features.

Some current features..
WIDEn-n TRACEn-n support enable/disable
Separate callsign setups and APRS symbols on each ports
Separate beacon texts for each port.
Separate beacon paths for each port.
User definable Aliases
Cross port digi with many many ports

Future feature developments
Preemptive aliases - These change certain paths when received to new paths
and resend
USERn-n -  User flood wide for Igate zones
Gateway behaviour-  Something to do with Igate funtionality because AGW
allready has a TCPIP interface

Tony  Hunt VK5AH


_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs