[OZAPRS] Bad signal on 30m
Richter, Mike W
Michael.Richter at team.telstra.com
Sat Nov 27 08:40:00 EST 2004
Getting RF Feedback using a TinyTrak should not be a surprise - the
inputs and outputs go direct to the chip without ANY form of filtering -
I suggest putting a 1k resistor in series and a 0.01uF to ground on all
pins that run off the board.
Mike VK2BMM
_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs
More information about the Ozaprs
mailing list