[OZAPRS] AGWPE, UI-View etc

[Des Shephard]

Hi Norm,

In UIView click on drop-down menu,  Setup--->Station Setup and in the 
Station Setup window
enter 1 or 2 in the "Unproto port" text-box.

You can also enter 1,2 and UIView will TX on port 1 and port2 as well. (ie

HF and VHF)

Regards,
Des VK4DMI
====

----- Original Message ----- 
From: "Norm McMillan" <njmcmillan at bigpond.com>
To: "OZAPRS" <ozaprs at marconi.ics.mq.edu.au>
Sent: Tuesday, November 23, 2004 1:03 PM
Subject: [OZAPRS] AGWPE, UI-View etc


> G'day all,
> Confusion is rife at VK2XCI!!!
>
> I have UI-view32 running into AGWPE.
> AGWPE has 2 radio ports defined
>
> Port 1. Soundcard modem into HF rig.
> Port 2. TNC2 running KISS into VHF digi
>
> I guess that UI-view knows nothing of the radio ports... it simply 
> connects to AGWPE???
>
> UIview "sees" input from both ports, hf and VHF and packets are decoded!
> UI-view will only output to Port 1.
> Can I change/combine/select the "output" port?
>
> Domestic pressure is such that I don't have a lot of time to spend at
the 
> moment, so any help is appreciated
>
>
> -- 
> Norm, VK2XCI,
> Voice of The Edge of The Outback.
> QF27wd
> _______________________________________________
> ozaprs mailing list
> ozaprs at marconi.ics.mq.edu.au
> http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs 

_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs