[OZAPRS] GT Oncore Modules

[Brenton Meadows Motorola GPS]

HI Andrew, 

Would be very interested in the pic interface, I have a qty of version 1.6
and 1.3 which then could be used.  They owe us $45 each so not real
pricey,
even with the pic added.
Regards
Brenton

Brenton J Meadows
Managing Director
Position and Navigation Systems Pty Ltd
Authorised Motorola OEM GPS Products
Authorised Yaesu  Distributor
19 Tennyson St
Medindie 
South Australia 5081
Australia
Ph  08 83424700
Fax 08 83424600
Mobile 0418 844700
Webpage: www.posnav.com.au
Email: brenton at posnav.com.au
 
##########################################################################

This e-mail is for the use of the intended recipient(s) only. If you have
received this e-mail in error, please notify the sender immediately and
then
delete it. If you are not the intended recipient, you must not use,
disclose
or distribute this e-mail without the author's prior permission. 

We have taken precautions to minimise the risk of transmitting software
viruses, but we advise you to carry out your own virus checks on any
attachment to this message. We cannot accept liability for any loss or
damage caused by software viruses.

##########################################################################

 


-----Original Message-----
From: ozaprs-bounces at marconi.ics.mq.edu.au
[mailto:ozaprs-bounces at marconi.ics.mq.edu.au] On Behalf Of Andrew McDade
Sent: Saturday, May 15, 2004 9:22 AM
To: ozaprs at marconi.ics.mq.edu.au
Subject: Re: [OZAPRS] GT Oncore Modules

Gday Ron,

Winoncore12 as mentioned should work and allow you to change the modes of
the GPS engine.
However just keep in mind that there was an older version of the oncore
gps
engine that only supports the Motorola proprietory data formats. It's very
similar to standard NMEA sentences , but different enough to make them
unusable for our purposes. The winoncore12 progam will enable you to
change
between the Motorola binary format , which is generally its default , and
the motorola ascii
format , which is "readable" but non NMEA compliant. If you find that you
have the older oncore gps engines ie the non GTplus type then let me know.
I
use the older oncores here , but with a pic interface that I knocked
together that does the conversion from the motorola ascii format to GGA
and
RMC sentences. I also have the manuals here as pdf files. But I think you
can get them off the net anyway. Let me know how you go.

Regards .. Andrew .. VK5EX



----- Original Message -----
From: "Ron and Val Smith" <rsmitj at tpgi.com.au>
To: <ozaprs at marconi.ics.mq.edu.au>
Sent: Saturday, May 15, 2004 6:09 AM
Subject: [OZAPRS] GT Oncore Modules


> Hi All,
> I have obtained a small number of the gps modules mentioned a short time
> ago.
> Has anybody found the software to work with the Morotola Binary Protocol
to
> command these to NMEA?
> I have made an interface for rs232 and it switchable from inverting to
> non-inverting but all I see is gibberish and sending the @@Ci command
from
> the keyboard does not work.
> Cheers
> Ron
> vk4ags
>
>
> _______________________________________________
> ozaprs mailing list
> ozaprs at marconi.ics.mq.edu.au
> http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs

_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs


_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs