[OZAPRS] HF TXdelays question

G T & C A Beagley beagley at xtra.co.nz
Sat Jun 19 11:06:12 EST 2004


Hi Tony

I'm using the UI-VIEW defaults of 400 and 40.
In the absence of any reports I assume it's working OK. I have seen my 
posit at findu.com with a raw packet via an HF VK so it seems to work.
Modem is an AEA DSP2232 and HF rig is ICOM IC726. Have also used the 
IC706IIG with same setup.

Graham

ZL1GTB

Tony Hunt wrote:
> I was wondering what sort of TXdelays are being run on HF ? On my
various
> setups I am using about 400mS .. Also a TXtail of about 90mS .. This was
a
> starting point or guide I was given a while back..
> 
> Considering some may be using squelched radios etc then whats the norm
with
> TXdelay ? Would be interested on some comments on this because from what
I
> can tell it does seem to matter..
> 
> 73 Tony Hunt VK5AH
> 
> 
> _______________________________________________
> ozaprs mailing list
> ozaprs at marconi.ics.mq.edu.au
> http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs
> 


-- 
G T & C A Beagley
24 Blomfield St
Rotorua 3201
New Zealand

Ph 07 3460677
(64 7 3460677)
Mob 025 531584

_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs



More information about the Ozaprs mailing list