[OZAPRS] Ipaq 3600 serial+charger cables?

[Darryl Smith]

I suggested as an Alternate C1 Communications - www.c1au.com. The guy who
runs it is a Ham too. I would suggest having a look at
http://estore.pressd.com which is their site. They have a bigger selection
of adapters and cases... including waterproof iPAQ cases

Darryl

---------
Darryl Smith, VK2TDS   POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International] 
www.radio-active.net.au\blog\ - www.radio-active.net.au\web\tracking
 

-----Original Message-----
From: ozaprs-bounces at marconi.ics.mq.edu.au
[mailto:ozaprs-bounces at marconi.ics.mq.edu.au] On Behalf Of
kpurves at pnc.com.au
Sent: Wednesday, 28 July 2004 12:26 PM
To: ozaprs at marconi.ics.mq.edu.au
Subject: Re: [OZAPRS] Ipaq 3600 serial+charger cables?

Hi Damien,

Have you tried www.gpsoz.com.au ? They are pretty helpful, I wanted just a
plug
with a bare  cable 1m long for my 5550 IPAQ (to interface with my home
brew
GPS/APRS system in the car), they didn't have it listed on there site but
I
rang them and they supplied it at a good price.

As far as mounts go, I used a CF Sleeve/jacket and attached the back of a
mobile
phone mount to it. The CF sleeve halves can be separated so that you can
drill
holes in it with out drilling through the Circuit Board. It made a very
sturdy
mount at a fraction of the price of a RAM unit and has the advantage of
extra
memory available for maps using the CF slot on the sleeve which is still
functional.

Regards

Kev

VK2KEV

Quoting Damien Gardner Jnr <rendrag at rendrag.net>:

> Howdy Folks,
> 
> Having just got me a copy of some funky GPS nav software for my ipaq and
> being a couple of days from getting the new bike on the road (which has
a
> very nice large space inside the rear fairings for mounting a
> GPS+transceiver, and a waaay over-rated alternator!), I'm looking to
> ram-mount my ipaq to the handlebars of the bike, but can't seem to find
a
> source of serial+charge cables.. - can find plenty of 'usb' cables, but
no
> combo serial+charge cables... Any thoughts?
> 
> Oh, any ideas of suppliers of ram mounts that will fit the ipaq+pcmcia
> sleeve would be useful too :
> 
> 73's
> 
> Damien
> 
> --
> Damien Gardner Jnr
> VK2TDG. Dip EE. StudIEAust
> Home: rendrag at rendrag.net -  http://www.rendrag.net/
> Play: vk2tdg at pinegap.net  -  http://pinegap.net/
> --
> We rode on the winds of the rising storm,
>   We ran to the sounds of thunder.
> We danced among the lightning bolts,
>   and tore the world asunder
> 
> _______________________________________________
> ozaprs mailing list
> ozaprs at marconi.ics.mq.edu.au
> http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs
> 



_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs


_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs