[OZAPRS] KPC-3 firmware for APRS

[David Hardy]

Barry,

Try
http://www.dididahdahdidit.com/kpctracker.php

I configured my one this way.

Dave


-----Original Message-----
From: ozaprs-bounces at marconi.ics.mq.edu.au
[mailto:ozaprs-bounces at marconi.ics.mq.edu.au]On Behalf Of akavk3
Sent: Thursday, 8 July 2004 2:33 PM
To: ozaprs at marconi.ics.mq.edu.au
Subject: RE: [OZAPRS] KPC-3 firmware for APRS


Thanks Terry,

I have been assisted directly in getting the KPC3 upgraded, haven't done
it
as yet however. I can burn my own eproms, so cost is not a factor.
I am interested in an instruction sheet for ver 8.2 or 8.3. Kantronics
have
downloadable manuals for the KPC3+ perhaps it might help, even though mine
is a (non plus).
I am aware of the tinytrack, and it may be the next project.

Thanks for your reply

Barry
VK3SW


-----Original Message-----
From: ozaprs-bounces at marconi.ics.mq.edu.au
[mailto:ozaprs-bounces at marconi.ics.mq.edu.au] On Behalf Of Terry Neumann
Sent: Wednesday, 7 July 2004 6:36 PM
To: ozaprs at marconi.ics.mq.edu.au
Subject: [OZAPRS] KPC-3 firmware for APRS


G'day Barry and others,

You could check with Ross (VK3MY) as he is (I think) still supplying
Kantronics gear.   If the factory no longer supports eprom upgrades for
this version, I guess the door might have to be opened to other options. 

I was able to get an eprom (Version 6 from memory) for the first series
KPC-3 (TCM3105 chip) from an amateur here in VK5 who had some access to
eprom reading and burning facilities.  This was some time ago, and quite
a few things have changed since then.   He may still be able to do this,
but I haven't contacted him for a while.    If you don't get any better
offers, contact me off list, and I'll see what I can find out.

The KPC-3 works OK in this role on 1200 APRS (VHF) - I have used it for
some years now.   Like most late "enhancements" the GPS facility is a
bit of a compromise, but it is quite functional and works well.    Alas
I cannot find the instruction/upgrade sheet which came with my eprom,
but it may come to the top of the pile, and when it does I could send it
to you.

More recently I've switched to a Tiny Track 3  which does much the same
sort of thing but with a few extra enhancements.   The costs of a new
eprom and/or burning one might nudge the budget closer to the cost of a
TT kit anyway - it depends what you have on hand at the present and all
the other factors which determine what the final station will be.

What callsign shall we look out for when you get it all going?

73
Terry
VK5ATN




_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs

----------------------------------------------------
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the system manager.
Please note that any views or opinions presented in this email are solely
those of the author and do not necessarily represent those of the company.
The recipient should check this email and any attachments for the presence
of viruses. The company accepts no liability for any damage caused by any
virus transmitted by this email.
----------------------------------------------------
_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs