[OZAPRS] FW: APRS Digi Controller

[Darryl Smith]

I have had a request for Help from Ron Smith VK4AGS up north in
Queensland.
Can anyone help

Darryl

---------
Darryl Smith, VK2TDS   POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International]
www.radio-active.net.au - www.radio-active.net.au\tracking
 
________________________________________
From: Ron and Val Smith [mailto:rsmitj at tpgi.com.au]
Sent: Thursday, 8 January 2004 7:31 AM
To: darryl at radio-active.net.au
Subject: APRS Digi Controller

Hi Darryl,
I am working with local clubs to set up a digi for APRS in the Gladstone
district in Central Queensland.
I have an 828 which is running fine on 145.175.  We have antennae etc.
The site is a solar site and as such we have to limit the current draw. It
is a good site with good coverage to the major north-south highway, the
coast for cruising yachts, and the local district.
I need a suitable TNC/controller for the digi.
I have tried the RX_RLY12 PIC based version but it will only repeat the
tracker.mic-e/pic-e beacons and ignores all others.
The power limitations prevent the use of a computer running one of the
APRS
software packages. 
Using an dm700 as a digi would be an over kill.
Can you advise on which way to go now.
Thanks
Ron
vk4ags
 


_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs