[OZAPRS] 30m VK3 H.F. Gateway
Ron Perry
ronk at sunlinux.com.au
Tue Oct 21 20:11:51 EST 2003
Hi,
From a proposed HF APRS gateway.
I put my rig on 10.149LSB to have a listen, and found I have strength 7
electrical noise..from somewhere. I'm not impressed one might say.
Guess I'll just have to start looking. But it wasn't there first thing
this morning. So I have hope.
Regards,
Ron
vk3ecv
Noel Rowe wrote:
> Ross said in his message to the group :
>
> >the gateway is back on air on the same frequency as before, 10.149
LSB,
>
> As the actual frequency of the transmitted output is dependent on the
> TNC used, is it possible to publish the frequency of the tones rather
> than the LSB frequency? This will make it easier for us to keep a
> listening watch, as we may not be using a similar TNC.
>
> Noel, ZL3GR.
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> ozaprs mailing list
> ozaprs at marconi.ics.mq.edu.au
> http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs
_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs
More information about the Ozaprs
mailing list