[OZAPRS] aprs filter help needed

[Geoff Gatward]

Andrew,



Under APRS SERVER SETUP there is a section “Extra Log-on text”.   In
there, you can define your own filter parameters, to allow what you want
to see.



This filter command must start with a hash followed by the word ‘filter’
and then the string to configure the filter.



For example, to set up to see only JA and JE stations, you would enter the
text

#filter p/JA/JE



To see all JO stations plus all stations within 500 miles of 33N 150E the
string would be

#filter p/JO r/33/150/500



Regards,

Geoff  VK2XJG



-----Original Message-----
From: ozaprs-bounces at marconi.ics.mq.edu.au
[mailto:ozaprs-bounces at marconi.ics.mq.edu.au] On Behalf Of Andrew Rich
(VK4TEC)
Sent: Thursday, November 13, 2003 8:52 AM
To: TAPR APRS Special Interest Group; ozaprs at marconi.ics.mq.edu.au
Subject: [OZAPRS] aprs filter help needed



Howdy,



I am running ui-vew



I want to run aprs.net.au 14580 filter on vk4



do I just put p/VK4 in the "send text on logon"

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20031113/1c7047d5/attachment.htm 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ATT05314.txt
Url: http://second.aprs.net.au/pipermail/ozaprs/attachments/20031113/1c7047d5/attachment.txt