<div dir="ltr"><div>Hi Tim,</div><div><br></div><div>Good to see your beacons coming through on 40m.</div><div>An interval of two minutes between beacons is in the normal range. Please do not think you need to lower the rate. There is no digipeating of beacons on 40m normally so no congestion.</div><div><br></div><div>Good luck on your trip. I'll follow it with interest.</div><div><br></div><div>Cheers,</div><div>Gerard - VK2IO</div></div><br><div class="gmail_quote"><div dir="ltr">On Mon, 9 Jul 2018 at 08:04, Graeme <<a href="mailto:graeme@abrona.com.au">graeme@abrona.com.au</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Yes Tim, very conscious that you were testing but also that I've seen <br>
beaconing every 30 seconds by some people, albeit on 2m, but causing <br>
significant congestion at 1200 baud.<br>
I occasionally test on 40m to be ready for that rare venture into outer <br>
areas, mostly with good success.  Have a good trip.<br>
<br>
Graeme 2hfg<br>
<br>
-----Original Message----- <br>
From: Tim Logan<br>
Sent: Monday, July 9, 2018 7:25 AM<br>
To: Australian APRS Users<br>
Subject: Re: [OZAPRS] 40m gates working well<br>
<br>
As mentioned in my email below Graeme, I am/was testing. Thanks for your <br>
concern..<br>
But Im sure you have looked at the current quantity of stations utilising <br>
the 40m APRS frequency, I haven’t been causing anybody too much harm over <br>
the weekend.<br>
Tim<br>
VK2HLT<br>
<br>
Sent from my iPad<br>
<br>
> On 8 Jul 2018, at 10:05 pm, Graeme <<a href="mailto:graeme@abrona.com.au" target="_blank">graeme@abrona.com.au</a>> wrote:<br>
><br>
> Tim,<br>
><br>
> It appears that you've been beaconing about every 2 minutes.  Have you <br>
> considered drawing that out to avoid tying-up the frequency too much?<br>
><br>
> Graeme 2hfg<br>
><br>
> -----Original Message----- From: Tim Logan<br>
> Sent: Sunday, July 8, 2018 9:22 PM<br>
> To: <a href="mailto:ozaprs@aprs.net.au" target="_blank">ozaprs@aprs.net.au</a><br>
> Subject: [OZAPRS] 40m gates working well<br>
><br>
> Thanks to VK7HSE, VK2IO and VK2UMZ running 40m gates, I’ve been running my <br>
> mobile on 40m ( standard licence) the last couple of days testing, heading <br>
> out into central SA this week so will be interesting to see how the <br>
> coverage is.<br>
> Tim<br>
> VK2HLT<br>
><br>
> Sent from my iPad<br>
> _______________________________________________<br>
> OZAPRS mailing list<br>
> <a href="mailto:OZAPRS@aprs.net.au" target="_blank">OZAPRS@aprs.net.au</a><br>
> <a href="http://lists.aprs.net.au/mailman/listinfo/ozaprs" rel="noreferrer" target="_blank">http://lists.aprs.net.au/mailman/listinfo/ozaprs</a><br>
> _______________________________________________<br>
> OZAPRS mailing list<br>
> <a href="mailto:OZAPRS@aprs.net.au" target="_blank">OZAPRS@aprs.net.au</a><br>
> <a href="http://lists.aprs.net.au/mailman/listinfo/ozaprs" rel="noreferrer" target="_blank">http://lists.aprs.net.au/mailman/listinfo/ozaprs</a><br>
_______________________________________________<br>
OZAPRS mailing list<br>
<a href="mailto:OZAPRS@aprs.net.au" target="_blank">OZAPRS@aprs.net.au</a><br>
<a href="http://lists.aprs.net.au/mailman/listinfo/ozaprs" rel="noreferrer" target="_blank">http://lists.aprs.net.au/mailman/listinfo/ozaprs</a> <br>
<br>
_______________________________________________<br>
OZAPRS mailing list<br>
<a href="mailto:OZAPRS@aprs.net.au" target="_blank">OZAPRS@aprs.net.au</a><br>
<a href="http://lists.aprs.net.au/mailman/listinfo/ozaprs" rel="noreferrer" target="_blank">http://lists.aprs.net.au/mailman/listinfo/ozaprs</a><br>
</blockquote></div>