<div dir="ltr">Radio, how powerful do you want? You can get modules ready to go on 145.175 FM; depending on what you get you can have 300mW to a 1W. <span style="line-height:1.5">TNC you can use an Arduino with an APRS shield, I have one from Argent Data, has the TNC on the shield so that Arduino only needs to do the basics, and an Arduino can connect directly to some 3G modems running OpenWRT, like my MR-3020 via the TTL or USB serial. All of that could fit in a very small case and could even run off a small solar power set up if needed.</span><div><br></div><div>Shield for Arduino, I own one of these, but I haven't put the pins on it and tested it yet:</div><div><a href="http://wiki.argentdata.com/index.php?title=Radio_Shield_2">http://wiki.argentdata.com/index.php?title=Radio_Shield_2</a> </div><div><br></div><div><span style="line-height:1.5">1W VHF FM transceiver, I have a few of VHF and UHF modules:</span></div><div><span style="line-height:1.5"><a href="http://www.hamshop.cz/avr-arduino-raspberry-pi-c16/vhf-transceiver-module-134174mhz-1w-dra818v-i266/">http://www.hamshop.cz/avr-arduino-raspberry-pi-c16/vhf-transceiver-module-134174mhz-1w-dra818v-i266/</a></span></div><div><br></div><div><span style="line-height:1.5">I want to put a VHF transceiver module on an Arduino shield and then with the APRS Shield I have a fully functioning TNC with transceiver, and with the right Arduino software, it can become a digipeater and the serial output from the APRS Shield is APRS packets, so that raw data can be sent to the internet as is.</span><br></div><div><br></div><div>TNC using the same microcontroller as the Arduino, I have made an older revision of this with an Arduino and a breadboard, worked well with a 300mW handheld in Wagga:<br></div><div></div><div><a href="http://unsigned.io/projects/micromodem/">http://unsigned.io/projects/micromodem/</a></div><div><br></div><div><div><span style="line-height:1.5">More processing power? You could use a Raspberry Pi with a (compatible) USB 3G modem and run a TNC-Pi. </span><a href="http://tnc-x.com/TNCPi.htm">http://tnc-x.com/TNCPi.htm</a></div></div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr">On Tue, 16 Feb 2016 at 13:55 Liz VK2XSE <<a href="mailto:edodd55@gmail.com">edodd55@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">QTR Tue, 16 Feb 2016 09:46:19 +0800 Gavin Rogers QTC<br>
<br>
> On 16/02/2016 9:40 AM, Liz VK2XSE wrote:<br>
> ><br>
> > The OM has produced one of his stash of Philips FM-828A radios from<br>
> > his "special place". Single channel version.<br>
> > Assuming that it is modified to 145.175, would it be suitable?<br>
> It'd cost you $50 or so for the crystals for a (granted, nearly<br>
> bulletproof) 40 year old radio, plus the time and effort to<br>
> mechanically tune it. Or $100 odd for a Chinese radio that's brand<br>
> new, or $50-100 or so for an ex-commercial Tait/Philips/Simoco from<br>
> eBay or a hamfest.<br>
><br>
><br>
> 73<br>
> Gavin<br>
> vk6hgr<br>
<br>
Overall 'bulletproof' is the required solution.<br>
I need 4 items, but some do come combined<br>
Radio<br>
TNC<br>
Mini Computer<br>
3G modem<br>
<br>
Combined items (my view) usually work well together.<br>
<br>
This is for a location which is currently completely beyond the VHF<br>
APRS system. It doesn't have access to internet through an ADSL or<br>
networked solution, although that may happen before the project is<br>
complete.<br>
<br>
<br>
-+-+-+-+-+-+-+-+-+-+-+<br>
Liz<br>
VK2XSE<br>
_______________________________________________<br>
OZAPRS mailing list<br>
<a href="mailto:OZAPRS@aprs.net.au" target="_blank">OZAPRS@aprs.net.au</a><br>
<a href="http://lists.aprs.net.au/mailman/listinfo/ozaprs" rel="noreferrer" target="_blank">http://lists.aprs.net.au/mailman/listinfo/ozaprs</a><br>
</blockquote></div>